User manual ELECTRO-VOICE PX1152M EDS

[. . . ] PX1152M 15" Two-Way Dual Manifolded HF 90° x 45° Full Range Loudspeaker System Key Features: · · · · · · · · · Dual ND2 2" Voice Coil, 1" Exit Neodymium Compression Drivers DVX3151 15" LF Transducer with Forced Air Cooling Very High Sensitivity, 134 dB Maximum SPL Ultra-Compact, Low Profile, Multipurpose Design 90° x 45° Coverage Pattern 600W Continuous (2400W Peak) Power Handling Passive/Biamp Selectable Integral Rigging Point for VSA-1 Strong Arm Pole Mount for Tripod Use General Description: The Electro-Voice PX1152M is a versatile fullrange, 2way floor monitor loudspeaker system that is part of the Electro-Voice® Phoenix Series and is intended for high output sound reinforcement in a large range of portable sound applications. [. . . ] The enclosure is constructed of 18-mm, 13-ply plywood, using tongue and groove joints and EVCoatTM for long term durability. As a stage monitor, the PX1152M provides symetrical left and right 60° monitor angles, and NL4 connectors on each side of the enclosure for connecting multiple monitors. An integrated rigging point allows for installation on a truss using the VSA-1 strong arm accessory. ® Technical Specifications: Freq. Hipass Frequency: 45 Hz Axial Sensitivity1: 100 dB (1W/1m) Max Calculated SPL1: 134 dB Horizontal Coverage: 90° Vertical Coverage: 45° Power Handling (Passive): 600W Continuous, 2400W Peak LF Power Handling (Biamp): 500W Continuous, 2000W Peak HF Power Handling (Biamp): 80W Continuous, 320W Peak LF Transducer: (1) DVX3151, 15 in. (381mm) Driver HF Transducers: (2) ND2-16, 2 in. (50mm) Diaphragm Compression Drivers Crossover Frequency: 1400 Hz Impedance (Passive): 8 Ohms Nominal LF Impedance (Biamp): 8 Ohms Nominal HF Impedance (Biamp): 8 Ohms Nominal Connectors: (3) Neutrik Speakon NL4's Enclosure Material: 18mm Plywood with Black EVCoatTM Suspension: Rigging Point for VSA-1 Strong Arm Accessory Grille: Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo Dim (H x W x D): 610mm x 442mm x 329mm (24. 00" x 17. 42" x 12. 97") Net Weight: 25. 1 kg (55. 3 lbs) Shipping Weight: 28. 2 kg (62. 1 lbs) 1 Half Space measurement. Dimension Drawings: Frequency Response & Impedance: 110 316 100 Sensitivity (dB) 100 90 80 Passive Mode, Half Space Biamp Mode, Half Space Impedance 20 50 100 1000 Frequency (Hz) 10000 10 70 3. 16 20000 Beamwidth: 360 -6dB Beamwidth (degrees) Front View Right View Vertical Horizontal 100 20 3. 6 20 100 1000 10000 20000 Bottom View Frequency (Hz) Block Diagram (Passive Mode): Frequency Response, Off-Axis: 110 100 Sensitivity (dB) 90 80 70 20 50 100 1000 Frequency (Hz) 10° 20° 10° 20° Down Down Up Up 20000 10000 PX1152M Part Number Block Diagram (Biamp Mode): · 302018-001 PX1152M, 90° x 40° Horn, Black Finish CP3000S, 120V, 2 x 1100W Compact Precision Series Power Amplifier DX38, Digital Loudspeaker Processor Performance Match · D170312 · D170348 Accessories · ACC000007001 VSA-1, Strong-Arm Mount, Black · D112941 Truss Clamp (Requires Suspension Arm) CAUTION This PX1152M Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]