User manual ELECTRO-VOICE REV

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE REV. We hope that this ELECTRO-VOICE REV user guide will be useful to you.

Lastmanuals help download the user guide ELECTRO-VOICE REV.


ELECTRO-VOICE REV : Download the complete user guide (379 Ko)

Manual abstract: user guide ELECTRO-VOICE REV

Detailed instructions for use are in the User's Guide.

[. . . ] Operating Instructions UHF WIRELESS MICROPHONE SYSTEM User Guide ENGLISH Table of Contents Section 1 - Quick Set-Up . . 25 Section Section Section Section Section Section 6 - Guidelines for Best Performance. Display will light up, show EV name and software revision numbers for about 3 seconds and then display the main operating screen. Press the MENU button twice to display the MENU option screen and then press set. [. . . ] The battery low LED and display back light will light for a second and the display will show the battery level, the Group and Channel numbers. Press SET, the Group number will flash and can be changed with the UP/DOWN keys. Once the desired Group number is showing, press SET to select and the Channel number will flash. Select the Channel and press SET again, the flashing will stop and the channel is now set. Press SET and DOWN at the same time to display the exact transmit frequency. Press SET and DOWN at the same time to display the battery level in percent. Set and Down one more time returns you to the Group and Channel screen. With the frequency screen displayed, press SET and use UP and DOWN to adjust frequency. Press SET and DOWN at the same time four times to return to Group and Channel mode. Attach Microphone or Guitar/Instrument Microphone - plug the TA4 end of the microphone cable into the top panel of the REV-BP. Speak into the microphone and the Audio Meter bar graph should indicate audio signal presence. Press SET, display will flash, press UP and display will change to Guitar, press set and return to main display. NOTE: The REV receiver must also be put into Instrument mode to optimize the system for guitar. Strum the guitar and the Audio Meter bar graph on the receiver should indicate audio signal presence. With the Gain Setting displayed, press SET and the level numbers will flash. Watch the Audio meter on the receiver and set the gain to peak between 50 and 100 when singing/speaking into the microphone as loud as it will be used during the performance. Press SET and DOWN at the same time two times to return to Group and Channel mode. NOTE: Operating with the transmitter audio gain set as high as possible (without distortion or peaks all the way to the right end of the meter) will result in the best performance and highest signal to noise ratio. With the RF Transmit Level displayed, press SET and the Level (on the right) will flash. Press SET and DOWN at the same time once to return to the Group and Channel mode. To engage power lock press and hold SET, UP and DOWN at the same time until ON-LOCK appears in the display. To turn the unit off while in ON-LOCK, place the power switch in the OFF position and push any one of the SET, UP or DOWN buttons. [. . . ] Operation is subject to the condition that this device does not cause harmful interference. Licensing of Electro-Voice/Telex equipment is the users responsibility and Licensability depends upon the users classification, users application and frequency selected. Electro-Voice/Telex strongly urges the user to contact the appropriate telecommunications authority for any desired clarification. CAUTION: Any changes or modifications made to the above equipment could void the users authority to operate the equipment. OTHER APPROVAL INFORMATION Intended use: All models are intended to be used in a system as Professional Radio Microphones. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE REV

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE REV will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag