User manual ELECTRO-VOICE XI-1123A106F EDS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE XI-1123A106F EDS. We hope that this ELECTRO-VOICE XI-1123A106F EDS user guide will be useful to you.
Lastmanuals help download the user guide ELECTRO-VOICE XI-1123A106F EDS.
Manual abstract: user guide ELECTRO-VOICE XI-1123A106F EDS
Detailed instructions for use are in the User's Guide.
[. . . ] Xi-1123A/106F
12-Inch Three-Way, Full-Range 100° x 60° Sound Reinforcement System
· · · · · · · · · · · Compact/High-Level, Three-Way Design VBS Capable DL12ST 12" Slot-Loaded Low-Frequency Driver DL10X 10" Horn-Loaded Mid-Bass Driver ND6-16 3" Diaphragm HF Compression Driver 100° x 60° High-Frequency Coverage Triamp or Biamp Operation Fully Rotatable HF and MB Sections for Vertical or Horizontal Suspension Ring-Mode Decoupling / RMDTM Built-In L-Track Rigging Available in Black or White
The Electro-Voice Xi-1123A/106F is a triamp-ready, threeway system in a unique two-element-line-array configuration designed for use in reverberant spaces. [. . . ] For applications requiring very high low-frequency sound pressure levels as well as very accurate vocal reproduction, the Xi-1123A/106 may be coupled with the Electro-Voice Xi1191A or Xi-2181A.
Freq. Range1 (-10 dB): 53 Hz - 19 kHz Max Calculated SPL2: 138 dB Coverage: 100° x 60° (Rotatable) LF Power Handling: 300W Continuous, 1200W Peak MB Power Handling: 300W Continuous, 1200W Peak HF Power Handling: 75W Continuous, 300W Peak LF Sensitivity: 96 dB, 1W/1m MB Sensitivity: 107 dB, 1W/1m HF Sensitivity: 112 dB, 1W/1m LF Impedance: 8 ohms (Nominal) MB Impedance: 8 ohms (Nominal) HF Impedance: 16 ohms (Nominal) LF Transducer: DL12ST 12" (305mm) Driver, 8 ohms MB Transducer: DL10X 10" (254mm) Driver, 8 ohms HF Transducer: ND6-16 3" (76mm) Diaphragm Comp. Driver, 16 ohms Crossover Frequency3: Use Recommended Parameters Connectors: Two Neutrik Speakon® NL8MPR Enclosure Material: 13-ply Birch plywood Grille: 16 GA steel Dim (H x W x D): 801 x 458 x 473 mm (31. 5" x 18. 0" x 18. 6") Net Weight: 52. 2 kg (115 lbs) Shipping Weight: 54. 5 kg (120 lbs)
1 2 3
Full Space measurement with a Dx38 Controller Max Calculated SPL of MB Section Download at www. electrovoice. com
Xi-1123A/106F Full Range Loudspeaker (3-Way)
Frequency Response (Full & Half Space): Impedance:
Horizontal Off Axis Frequency Response:
Beamwidth with VBS (Dipole): Vertical Off Axis Frequency Response (Up):
Vertical Off Axis Frequency Response (Down):
Directivity with VBS (Dipole):
Engineering Data Sheet
Horizontal 1/3 Octave Polars (3-Way): Vertical 1/3 Octave Polars (3-Way):
Triamp to Biamp - Switch 4-Pin Connector on inside of Input Panel.
Triamp LF: Pins 1 In Pins 2 Out MB: Pins 3 In Pins 3 Out HF: Pins 4 In Pins 4 Out
Biamp LF: Pins 1 In Pins 2 Out MB/HF: Pins 3 In Pins 3 Out Pins 4 Pass Through
Pins 2 In Connected to Pins 1 Out
This Xi Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the X-Array Xi Install Flying Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.
Xi-1123A/106F Part Numbers
· · 1149-3415 - Black 1149-3404 - White
Architectural & Engineering Specs:
· P3000 (RL) · CPS 2. 8 · Dx38 · P1200 (RL) · CPS 2. 11
The loudspeaker system shall be a three-way tri-amp or bi-amp system. The system shall have an 12-inch, low-frequency loudspeaker with a nominal impedance of 8 ohms and a 2. 5-inch voice coil. The low-frequency loudspeaker shall have a power handling capacity of 300 watts for 8 hours (as per ANSI/EIA RS-426 A & AES 2-1984). The mid-bass loudspeaker shall be a fully horn loaded, 10-inch driver with a 2. 5-inch voice coil and a nominal impedance of 8 ohms. The mid-bass driver shall have a power-handling capacity of 300 watts for 8 hours (as per ANSI/EIA RS-426 A). [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE XI-1123A106F EDS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE XI-1123A106F EDS will begin.