User manual ELECTRO-VOICE XI-1153A64F EDS

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE XI-1153A64F EDS. We hope that this ELECTRO-VOICE XI-1153A64F EDS user guide will be useful to you.

Lastmanuals help download the user guide ELECTRO-VOICE XI-1153A64F EDS.


ELECTRO-VOICE XI-1153A64F EDS : Download the complete user guide (329 Ko)

Manual abstract: user guide ELECTRO-VOICE XI-1153A64F EDS

Detailed instructions for use are in the User's Guide.

[. . . ] Xi-1153A/64F 15-Inch Three-Way, Full-Range 60° x 40° Sound Reinforcement System Key Features: · · · · · · · · · · High-Level, Three-Way Design VBS Capable EVX-155 15" Slot-Loaded Low-Frequency Driver DL12ST 12" Mid-Bass Driver (60° x 40° Coverage) Coaxially-Mounted ND6-16 3" Diaphragm HF Compression Driver Fully Rotatable HF Section for Vertical or Horizontal Suspension Ring-Mode Decoupling / RMDTM Built-In L-Track Rigging Available in Black or White Dimensions Identical to Xi-1191 and Xi-2181 Subwoofers, Footprint Identical to Xi-2153 General Description: The Electro-Voice Xi-1153A/64F is a full-bandwidth, threeway, triamp system is designed for medium- to long-throw applications. [. . . ] The DL12ST 12-inch, application-specific mid-bass driver features RMDTM and a 60° x 40° horn. The ND6-16 highfrequency driver/horn combination is fully "shrouded" to preserve midbass wave-front detail. ® Technical Specifications: Freq. Range1 (-10 dB): 40 Hz - 19 kHz Max Calculated SPL2: 134 dB Coverage: 60° x 40° (Rotatable) LF Power Handling: 600W Continuous, 2400W Peak Pre lim ina ry 1 2 3 MB Power Handling: 300W Continuous, 1200W Peak HF Power Handling: 75W Continuous, 300W Peak LF Sensitivity: 91 dB, 1W/1m MB Sensitivity: 107 dB, 1W/1m HF Sensitivity: 112 dB, 1W/1m LF Impedance: 8 ohms (Nominal) HF Impedance: 16 ohms (Nominal) LF Transducer: EVX155 15" (381mm) Driver, 8 ohms MB Impedance: 8 ohms (Nominal) MB Transducer: DL12ST 12" (305mm) Driver, 8 ohms HF Transducer: ND6-16 3" (76mm) Diaphragm Comp. Driver, 16 ohms Connectors: Two Neutrik Speakon® NL8MPR Paralleled Grille: 16 GA steel Crossover Frequency3: Use Recommended Parameters Enclosure Material: 13-ply Birch plywood Dim (H x W x D): 914 x 586 x 759 mm (36. 0" x 23. 1" x 29. 9") Net Weight: 88. 8 kg (195 lbs) Shipping Weight: 92. 6 kg (204 lbs) Full Space measurement with a Dx38 Controller Max Calculated SPL of MB Section Download at www. electrovoice. com Dimension Drawings: Wiring/Connection Chart: Triamp LF: Pins 1 In Pins 2 Out MB: Pins 3 In Pins 3 Out HF: Pins 4 In Pins 4 Out Pins 2 In Connected to Pins 1 Out CAUTION This Xi Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the X-Array Xi Install Flying Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances. Performance Match Xi-1153A/64F Part Numbers · · 1058-3444 - Black 1058-3447 - White Architectural & Engineering Specs: · P3000 (RL) · CPS 2. 8 · Dx38 · P1200 (RL) · CPS 2. 11 The loudspeaker system shall be a three-way tri-amp system. The system shall have a 15-inch, low-frequency loudspeaker with a nominal impedance of 8 ohms and a 4 inch aluminum voice coil. The low-frequency loudspeaker shall have a power handling capacity of 600 watts with a shaped pinknoise signal with a 6-dB crest factor for 8 hours (as per ANSI/EIA RS-426 A & AES 2-1984) The mid-bass loudspeaker shall be a fully horn loaded, 12-inch driver with a 2. 5-inch voice coil and a nominal impedance of 8 ohms. The mid-bass driver shall have a power-handling capacity of 300 watts for 8 hours (as per ANSI/EIA RS-426 A). [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE XI-1153A64F EDS

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE XI-1153A64F EDS will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag