User manual ELECTROLUX EDB 5110MO

[. . . ] If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard. The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable. Never leave the appliance unattended while connected to the supply mains. [. . . ] Dry iron while still damp or use spray to dampen. Steam iron on wrong side or use ironing cloth. Iron on wrong side or use ironing cloth to prevent shine marks, especially with dark colours. Dry iron while still damp or use spray to dampen. GB Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table!When turned on for the first time, temporary vapours/odours may occur. Make sure plug is removed from power outlet. set temperature by turning temperature selector to adequate choice. When the light turns off, iron is ready to be used. Ensure that water tank is at least 1/4 full. Use spray mist to pre-dampen fabrics by pressing spray button several times to release a fine mist (A). To use the steam jet function, ensure that tank is at least 1/2 full. If iron is left unattended on soleplate or on the side, it turns off after 30 seconds. If left unattended on the heel, it turns off after 8 minutes. 12 14:49 Cleaning (do not use any detergent) Nettoyage (ne pas utiliser de détergent) Reinigen (keine Reinigungsmittel verwenden) Reinigen (gebruik geen reinigingsmiddelen) G GB 1. To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these will damage the surface. Move steam button to selfcleaning position, hold for 5 seconds to empty water from steam holes. Do not use scouring pads or harsh cleaners on the soleplate as these will damage the surface. to remove burnt residue , iron over a damp cloth while iron is still hot. [. . . ] Put iron on horizontal position and wait before using steam jet function. adjust the proper temperature to steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns off. 12 14:49 Stryktabell Tyg Akryl Acetat Nylon och polyester Rayon Viskos Silke Bomullsblandningar Ull och ullblandningar Bomull Manchester Linne Denim/jeans till max till max Temperaturinställning Strygetabel Strykrekommendationer Torrstryk på avigsidan. [. . . ]