User manual ELECTROLUX LNC7MD32W2

[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Get usage advice, brochures, trouble shooter, service and repair information: www. [. . . ] Each time the OK Temperature setting device is changed, wait for the stabilisation of the temperature inside the appliance before proceeding, if necessary, with a new temperature setting. Please change the position of the temperature setting device progressively and wait at least 12 hours before starting a new check and potential change. NOTE: Following repeated openings (or prolonged opening) of the door or after putting fresh food into the appliance, it is normal for the indication "OK" not to appear in the temperature setting indicator. If there is an abnormal build up of ice crystals of ice crystals (bottom wall of the appliance) on the refrigerator compartment, evaporator (overloaded appliance, high room temperature, frequent door openings), put the temperature setting device on a lower position until compressor off periods are obtained again. Store food in the coldest area of the refrigerator. Your foods will be better stored if you put them in the most appropriate cooling area. The coldest area is just above the crisper. The following symbol indicates the coldest area of your refrigerator. To be sure to have a low temperature in this area, make sure the shelf is located at the level of this symbol, as shown in the illustration. The upper limit of the coldest area is indicated by the lower side of the sticker (head of the arrow). The coldest area upper shelf must be at the same level with the arrow head. As these shelves are removable, make sure they are always at the same level with these zone limits described on the stickers, in order to guarantee temperatures in this area. Fill the ice tray with water and place in the freezer compartment. After the water has completely frozen, you can twist the tray as shown below to remove the ice cubes. The Freezer Box The freezer box allows food to be accessed more easily. Pull the box out as far as possible · Pull the front of the box up and out Carry out the opposite of this operation when refitting the sliding compartment. Always keep hold of the handle of the box while removing it. Extra Chill Compartment (In some models) Ideal to preserve the taste and texture of fresh cuts and cheese. The pull out drawer assures an environment with a lower temperature compared to the rest of the fridge, thanks to the active circulation of cold air. Pull the chiller shelf towards you by sliding it on the rails. Pull the chiller shelf up from the rail and remove it from the fridge. If the crisper is full, the fresh dial located in front of the crisper should be opened. [. . . ] This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model. 8) Freezer bottom basket 9) Levelling feet 10) Ice box tray 11) Freezer glass shelves * 12) Bottle shelf 13) CustomFlex 14) Egg holder The technical information is situated in the rating plate on the internal side of the appliance and on the energy label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. [. . . ]