User manual ELECTROLUX PD91-8SSM

[. . . ] Insert a new s-bag to the holder by inserting the cardboard at the back of the holder. 14 Insert the s-bag with holder by pushing it straight down in its tracks. Make sure the s-bag is not stuck under the holder. If the s-bag is not properly placed or is missing, the lid will not close. [. . . ] 11 Replace the s-bag when - P* Models with rotary knob: S-BAG indicator lights up in red - Q* Models with remote control: S-BAG symbol lights up red. - R* Models with remote control and AUTO: S-BAG indicator lights up In red (green light: bag is OK, yellow light: soon time to replace bag). NB: Always change the s-bag when S-BAG indicator is illuminated or has red light even if the s-bag is not full (it may be blocked) and after 25 Nozzle with front lights*: Change batteries when front lights start blinking fast. 26 Handle with remote control*: Change battery when light indicator Turns red or is not responding when pressing any button. NB: Remove the batteries from the product before scrapping. Your country's rules for collection of batteries and electrical products. Enjoy a great cleaning experience with PURED9!- For all floor types, secures best dust pick - Brushes and vacuums at the same time Time (best pick up of hair, fibres (best pick up of hair, fibres etc). - Not suitable for carpets with very - Brush roller is driven by the airflow of the - Not suitable for carpets with very deep - Best dust pick up on hard floor - Can easily turn 180 degrees for direct Models with manual power regulation ­ follow graphics on cleaner for optimal performance. Models with AUTO-function automatically adjust the suction power In order to give an optimal cleaning performance and comfort on every surface. For manual regulation, follow graphics for optimal performance. Check that the cable is connected to the mains. The vacuum cleaner does not start Check that the plug and cable are not damaged. Check if the battery indicator lamp in the remote control handle responds (certain models only). The s-bag® indicator light is illuminated If you have already changed the s-bag®, change the motor filter. The filter indicator light is illuminated (only at specific models) Change, or wash (if washable), the exhaust filter. The cleaner stops The cleaner might be overheated: disconnect it from the mains; check if the nozzle, tube, hose or filters are blocked. Let the cleaner cool down for 30 minutes before plugging it in again. If the cleaner still does not work, contact an authorized Electrolux service centre. Check if the motor filter is clogged and needs changing. However, be careful in case the obstruction has been Caused by glass or needles caught inside the hose. Note: The warranty does not cover any damage to the hose caused by cleaning it. [. . . ] In liquid or using appliance with a damaged hose and nozzle is not Covered by the warranty. Always use original s-bag dust bags suitable for this particular vacuum Damages caused to the cleaner by incorrect use of UA none-original dust bags is not covered by the warranty. Never use the vacuum cleaner: Trvá piblizn 10 sekund, nez zhasne kontrolka S-BAG (u model P* s otocným knoflíkem a u model Q* s dálkovým ovládáním) nebo zacne 15 Filtr vymte/vycistte**, kdyz (**pouze u omyvatelného filtru - u model P* s otocným knoflíkem: jste 5x vymnili prachový sácek s-bag - u model Q* s dálkovým ovládáním: se rozsvítí symbol FILTRU cerven Check if the motor filter is clogged and needs changing. Knappen for at tænde eller slukke for støvsugeren. [. . . ]