User manual ELECTROLUX ULTRAFLEX ZUFGREEN

[. . . ] The above can cause serious damage to the motor, which is not covered by the warranty. This vacuum cleaner is for domestic use only. Power cord precautions • Regularly check that the plug and cord are not damaged. Never use the vacuum cleaner if the cord is damaged. [. . . ] Damage to the vacuum cleaner’s cord is not covered by the warranty. € Never pull or lift the vacuum cleaner by the cord. all servicing and repairs must be performed by an authorized Electrolux service centre. Store the vacuum cleaner in a dry place. Consumer information and sustainability policy Electrolux declines all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. For more details of warranty and consumers’ contacts see the Warranty Booklet in the packaging If you have any comments on the cleaner or the Operating Instructions manual please e-mail us at floorcare@electrolux. com Sustainability policy This product is designed with the environment in mind. All plastic parts are marked for recycling purposes. Gre hun ita latv lith ned nor pol por 24 Cerinţă şi avertisment de siguranţă Acest aparat poate fi utilizat de copiii cu vârsta mai mare de 8 ani, de persoanele cu capacităţi fizice, senzoriale sau mentale reduse sau de persoanele fără cunoştinţe sau experienţă doar sub supraveghere sau după o scurtă instruire care să le ofere informaţiile necesare despre utilizarea sigură a aparatului şi să le permită să înţeleagă pericolele la care se expun. AeroPro 3 in 1 nozzle * Accessories may vary from model to model. Pull out the filter frame placed behind the dust bin. Remove the filter from the filter frame. Let dry for 24 hours before fitting it back to the machine. When the filter is dry, refit the filter into the filter frame properly without gaps. The short inlet and outlet tubes can be removed if anything got caught. Detach by pulling the tube at the top (reverse order to put it back). Refit the filter and filter frame back to the machine body. Use the hose handle to clean the nozzle. If the wheels are stuck, clean them by removing the wheel cap with a small screwdriver. Unscrew the wheel axis and clean all parts. [. . . ] The vacuum cleaner does not start • Check that the cable is connected to the mains. € Check that the plug and cable are not damaged. However, be careful in case the obstruction has been caused by glass or needles caught inside the hose. Note: The warranty does not cover any damage to hoses caused by cleaning them. [. . . ]