User manual ELEKTRA EOR106

[. . . ] Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. [. . . ] A guide sheet (Wall Mount Bracket Installation Template) is supplied to drill. Use the sheet to check the point to drill. Mounting the main unit on a wall You can mount the main unit on a wall. Prepare screws and brackets. Wall Mount Brac ket Installation Template 2 Connecting Unit Wall Mount Bracket Installation Template Wall bracket 1. Match the TV?s BOTTOM EDGE of Wall Mount Bracket Installation Template with the bottom of TV and attach to the position. TV Screws and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti (HUD-1 6 x 30) for the mounting. Please purchase it. Note , , EOR106-NB_DHUNLLS_ENG_7614. indd 12 2012-09-10 ??2:37:19 Connecting 3. Remove the Wall Mount Bracket Installation Template. 4. Fix it with screws (not supplied) as shown in the illustration below. 13 5. Hang the main unit onto the bracket as shown below. 2 Connecting yy Do not hang onto the installed unit and avoid any impact to the unit. yy Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product. yy When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall. Caution >> Detach the unit from the bracket as shown below. Note , , EOR106-NB_DHUNLLS_ENG_7614. indd 13 2012-09-10 ??USB : MP3/ WMA containing file information OPTICAL IN 1/ 2 : Audio format, Audio channel Sleep Timer Setting Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until ?SLEEP 10?appears, and then press SLEEP once again while ?SLEEP 10?You can check the remaining time before the Unit turns off. The remaining time appears in the display window. 3 Operating Note , , Dimmer Press SLEEP once. The display window will be darken by half. To cancel it, press SLEEP repeatedly until dim off. Turn off the sound temporarily Press MUTE to mute your unit. You can mute your unit, for example, to answer the telephone, the ?is displayed in the display window. EOR106-NB_DHUNLLS_ENG_7614. indd 17 2012-09-10 ??2:37:20 18 Operating Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. [. . . ] Operate the remote control within about 23 ft (7m). There is an obstacle in the path of the remote control and the unit. The battery in the remote control is exhausted. Depending on the connected device by the optical cable, this function may not operate. [. . . ]