User manual ELEKTRO HELIOS FB 325

[. . . ] Backspace deletes one character at a time. Confirm menu function or save entry. ¢ ¢ 2 The base station at a glance 1 Registration/paging key: page 11) Search for handsets (press briefly, "Paging" page 11). Register handsets (press and hold ¢ ¢ ECO DECT You are helping to protect the environment with your Gigaset A390. Reduced energy consumption Your telephone has an energy-saving adapter plug and uses less energy. Reduced transmission power The transmission power of your telephone is reduced automatically: The handset's transmission power is reduced depending on the distance to the base station. The transmission power on the base station is reduced to almost zero when only one handset is registered and the handset is in the base station. [. . . ] The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type. 6 ¤ Insert the batteries the right way round. The polarity is indicated in/on the battery compartment. ¤ Slide the battery cover from bottom up onto the casing until it clicks into place. ¤ If you need to open the battery cover, for instance to replace the batteries, press the ribbing at the top of the battery cover and slide it downward. Placing the handset in the base/charger Place the handset in the base/charger with its display facing forward. Each handset of your package is registered with the base at the factory. You do not need to register the handset again. If you wish to use your handset with a different base or use further handsets with your base, you have to register the handset manpage 11). ually ( ¤ ¢ To charge the batteries, leave the handset in the base/charger. Please note Only place the handset in the designated base/charger. 7 Initial charging and discharging of the batteries The correct charge level can only be displayed if the batteries are first fully charged and discharged. 18 h ¤ Place the handset in the base station or charging cradle for 18 hours. ¤ Then remove the handset from the base station or charging cradle and do not replace it until the batteries are completely discharged. Please note After the first battery charge and discharge you may replace your handset in the base station or charging cradle after every call. Always repeat the charging and discharging procedure if you remove the batteries from the handset and reinsert them. The batteries may warm up during charging. After a while, the charge capacity of the batteries will decrease for technical reasons. Warning Please ensure that the handset is in the charging cradle if you are absent for a long time (e. g. 2 The caller has asked the network provider for his number to be identified (CLI). Enter the first character of the name and scroll to the entry with u, if required. ® appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable appears if the caller has not requested CLI. 10 Dialling with the directory h ¢ u (select entry) ¢ c Using other functions h ¢ u (select entry) ¢ MENU The following functions can be selected with u: New Entry Managing entries in the last number redial list c (press briefly) ¢ u (select entry) ¢ MENU You can select the following settings: Use Number Save new phone number. Copy to Dir. Delete Entry Delete List Show Number Display the phone Use Number Edit Entry Delete Entry Delete List Send List number. Then dial or use other functions with MENU. Send the complete list to another handset (¢ page 10). Edit or add to the number. Then dial or use other functions with MENU. Delete all entries. Calls list/network mailbox list The message key flashes as soon as a new entry appears in the calls list/answer machine list. When you press the f key, all the lists are displayed. If only one list contains new messages, this will be opened automatically. Please note If calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made (depending on your network provider). Sending the directory to another handset Preconditions: The sending and receiving handsets must both be registered to the same base station. The other handset and the base station can send and receive directory entries. the receiving handset) h ¢ u (select entry) ¢ MENU ¢ Send List ¢ OK ¢ u (select number of Calls list Precondition: CLIP (¢ page 9) Depending on the type of list set (¢ page 15), the calls list contains: answered calls missed calls Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved. The calls list is displayed as follows: CallsList 01+02 Number of new entries + number of old, read entries ¢ OK Last number redial list This list contains the 10 last dialled numbers. Dialling from the last number redial list c (press briefly) ¢ u (select entry) ¢ c 11 Open the calls list f ¢ CallsList 01+02 ¢ OK The last incoming call is displayed. [. . . ] Software reset MENU Settings OK Base Reset OK ¢ ¢ ¢ ¢ ¢ Base ¢ OK P # a d g j m p t w . * Abc --> 123 1 b e h k n q u x , / 123 --> abc £ c f i l o r v y ?) @ ¥ ä ë ï ö 7 ü 9 0 < \ ¤ áàâãç éèê íìî ñ ß ú ÿ + = & óòôõ ù ý > § û æøå :¿¡" % ' ;_ 1) Space 14 Specifications Recommended batteries Technology: Nickel-metal-hydride (NiMH) Size: AAA (Micro, HR03) Voltage: 1. 2 V Capacity: 650 mAh We recommend the following types of battery: GP 550/700 mAh Yuasa Phone 700/800 mAh Peacebay 550/650 mAh Corun Ni-MH AAAJ650 (650 mAh) Highpower HFR-44AAAJ650 (650 mAh) (Valid at the time of going to press) The handset is supplied with recommended batteries. Questions and answers If you have any queries about the use of your telephone, visit our website at www. gigaset. com/customercare for 24-hour support. The table below contains a list of common problems and possible solutions. [. . . ]