User manual ELEKTRO HELIOS FK357

[. . . ] Ringer melody on/off  (press and hold in idle status) 9. Keypad lock on/off (press and hold in idle status) 10. Recall key - Recall (flash) - Dialling pause (press and hold) Display keys on handset: Pressing a key launches the function that appears above that key in the display. 1 2 3 INT 1 11. 12. 11:56 Þ Menu Ð V 4 5 6 7 Display Function when pressed Open redial list (¢ P. [. . . ] The strength of the reception signal between base and handset: – Good to poor: Ð ¨ § ¦ – No reception: ¥ Ð V Charge status of the batteries: INT 1 – U Batteries charged to over 66% 11. 12. 11:56 – V Batteries charged to between 34% and 66% – e Batteries charged to between 11% and 33% Þ Menu – = Flashes: batteries charged to below 11% – = e V U Charging If Eco Mode+ (¢ P. 1) is activated, the ½ icon is displayed in the top left corner of the display. Activating/deactivating the handset Press and hold the end call key a to activate or deactivate the handset. If you place a deactivated handset in the base or charger, it will automatically be activated after a specific period of time (approx. If you have any questions about using your phone, please read the tips on troubleshooting ("Questions and answers" ¢ P. 10) or contact our Customer Care team (¢ P. 11). AL410H (Puma glossy) / IM4 eng / A31008-M2267-R151-1-4N19 / main. fm / 20. 09. 2012 7 Making calls Making external calls and ending calls External calls are calls using the public telephone network. (Or you can first press and hold c [dialling tone] and then enter the number. ) During the call you can adjust the earpiece volume using t and set the volume with q. Ending a call/cancelling dialling: Press the end call key a. Is your telephone connected via a PABX/gateway?You can establish this by checking for an additional device connected between your telephone and home connection e. g. , a PABX, gateway etc. In most cases, simply resetting this device will remedy the situation: ¤ Briefly disconnect the PABX power plug. Re-insert the plug and wait for the device to restart. Delete Entry Delete List Using other lists Depending on the base, your telephone has the following: u Answering machine list u Network mailbox list u Calls list when you press f, the list selection opens. You can scroll through the available lists. The lists are displayed as follows  (e. g. , calls list): CallsList 01+02 Delete Entry Send Entry Delete List Send List Shortcut Number of new entries + number of old, read or played back entries. Select the required list and open by pressing OK. AL410H (Puma glossy) / IM4 eng / A31008-M2267-R151-1-4N19 / main. fm / 20. 09. 2012 9 An advisory tone sounds as soon as a new message appears in a list. You can select whether you also want a message to appear on the display or the message key f to flash: Menu ¤ P#Q5#M ¤ XY ¤ OK Setting the alarm clock Activating/deactivating the alarm clock Menu ¤ Alarm Clock ¤ OK ¤ Activation ¤ OK (‰ = activated) X = 5 for missed calls M for messages on the answering machine Y= Q visual signal activated (default setting) 1 visual signal deactivated Settings will only be changed once a new message has been received. If activated: ¤ Enter wake-up time ¤ OK Answering machine list (dependent on base) You can use the answering machine list to listen to messages that are on the answering machine (see base user guide). When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon 9 will appear on the screen and the wake-up time will be displayed instead of the date. Entering/changing the wake-up time Menu ¤ Alarm Clock ¤ OK ¤ Wake-up time ¤ OK Network mailbox list (dependent on base) You can use the network mailbox list to listen to messages that are on the network mailbox. You will only see this list when the network mailbox number is entered (see base user guide). Enter the wake-up time in hours and minutes, then press OK. The alarm clock is automatically activated after the wake-up time is entered/changed. Changing phone settings For details on performing audio settings and activating/deactivating warning and advisory tones and key tones (see menu tree ¢ P. For details on setting the display contrast and large dialling numbers (see menu tree ¢ P. 12). Calls list Prerequisite: CLIP (¢ P. 7) Depending on the base, the calls list contains: u Accepted calls u Missed calls u Calls recorded by the answering machine Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved. Calling back a caller from the calls list Changing the display language Menu ¤ Settings ¤ OK ¤ Handset ¤ OK ¤ Language ¤ OK ¤ q Select language ¤ OK  The current language is indicated by ‰ . Menu ¤ 421 ¤ q select language ¤ OK (‰= selected) f ¤ CallsList 01+02 ¤ OK ¤ q (select entry) ¤ c If you accidentally choose a language you do not understand: Using the fast access function for the answering machine or network mailbox Simply press and hold key 1 on the handset and you will be connected directly to the answering machine/network mailbox (see base user guide). Resetting the handset You can reset any individual settings and changes that you have made. [. . . ] 22 70 84 00 (Oppstartskostnad 89 øre + 15 øre pr. For samtaler fra mobiltelefon gjelder egne priser. ) Oman . (351) 808 781 223 (custo de uma chamada local) Romania . +380-44-451-71-72 United Arab Emirates . [. . . ]