User manual ELK PRODUCTS ELK-55

[. . . ] Size: 4"H x 4" W x 3. 5"D. Mounting: Removable "U" Shaped Bracket. Features and Specifications subject to change without notice. PO Box 100 · Hildebran, NC 28637 USA · 828-397-4200 · 828-397-4415 FAX http://www. elkproducts. com · email: info@elkproducts. com 05/02 WIRING CONNECTIONS for ELK- 55 WHITE (Burglary BA+): Connect to the positive (+) 12 VDC Burglary alarm output terminal. NOTE: This input utilizes our ComboTriggerTM feature which automatically recognizes the difference in a steady voltage or a pulsing voltage from the control's alarm "bell" output. If the input voltage is steady the Yelping siren and Burglary voice message will play. [. . . ] When connected in this manner, this input will also activate the Fire channel message if the alarm output is pulsed on/off in 1/2 to 1. 5 second intervals. VOICE MESSAGES Voice messages are spoken in English, Spanish/English, or Spanish only, depending upon the switch and jumper settings. Each channel has an initial cycle, followed by a repeating cycle. Tone, Intruder, intruder, leave immediately followed by warble or pulsing buzzer sound. Repeat FA (English): Fire, fire, leave immediately Followed by a loud distinctive Temporal Coded Bell sound. Tone, Intruso, intruso Followed by warble or pulsing buzzer sound. Repeat (Message will alternate in English unless J3 is opened. ) FA (Spanish): Incendio, incendio Followed by a loud distinctive Bell sound. Repeat (Message will alternate in English unless J3 is opened. ) PULSING BA INPUT: (Spanish or English) 3 Sec. Tone, Fire, fire, leave immediately Followed by a Temporal Coded Bell sound. Repeat Jumper Options: J1 J1 J2 J3 J4 J5 Closed = Full Volume Open = Volume StepTM Siren starts off at low volume and gradually steps up to full volume in 90 seconds. Great for controls that have limited alarm current. J3 Closed Closed Open Open Closed Closed Open J4 Closed Closed Open Open Open Open Closed J7 Closed Open Closed Open Closed Open Closed Elk-55 Circuit Board (inside speaker) Open Closed SOUND STEPS LANG. VOL. J2 WHITE (Burglary BA+) ORANGE (Fire FA+) RED (12Vdc +) GREEN (Burglary BA -) J7 J5 BLACK (Neg. -) VOICE English Speech plus Siren = English Speech Only = Closed Open Spanish Speech plus Siren = Spanish Speech Only = Spanish and English plus Siren = Spanish and English Only = Siren Sounds Only (No Voice) = Figure 1 Wiring hookup and view of inside with back removed. LIFETIME LIMITED WARRANTY Elk Products, Inc. ("Manufacturer") warrants to the original purchaser (the "Customer") that the products it manufactures ("Product") shall be free from defects in material and workmanship at time of shipment. Manufacturer's obligations under this Limited Warranty shall be limited to repairing or replacing, at its option, free of charge, any product returned to Manufacturer freight prepaid. Manufacturer shall have no obligation under this Limited Warranty or otherwise if (1) the Product has been damaged by negligence, accident, mishandling, lightning or flood, or other Acts of God, (2) the Product has not been operated in accordance with its operating instructions, (3) the Product has been altered or repaired by anyone outside Manufacturer's authorized facilities (4) adaptations or accessories have been made or attached to the Product which, in Manufacturer's sole determination, have adversely affected its performance, safety or reliability. Products such as batteries and fused transformers have their own warranties, and are not included in this Limited Warranty. If a Product should malfunction or fail, contact Manufacturer or one of its authorized distributors for a Return Authorization (RA) number. Returned Products must include a complete description of the problem, along with the RA number clearly marked on outside of the package. Manufacturer will not be responsible for any unnecessary items included with any returned Product. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. [. . . ]