User manual ELNA EXPERIENCE 520
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELNA EXPERIENCE 520. We hope that this ELNA EXPERIENCE 520 user guide will be useful to you.
Lastmanuals help download the user guide ELNA EXPERIENCE 520.
Manual abstract: user guide ELNA EXPERIENCE 520
Detailed instructions for use are in the User's Guide.
[. . . ] EXperience 520
Instruction Manual | Mode d’emploi | Gebrauchsanleitung
IMPORTANT SAFETY INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. When using an electrical appliance, basic safety precautions should always be followed, including the following: Your sewing machine is designed and manufactured for household use only. An appliance should never be left when WARNING— To reduce theattentionburns, fire, electric shock, sewing machine is used by or near risk of or injury to persons: 1. [. . . ] #06 Stretch stitch: Zigzag foot A This is a narrow stretch stitch designed to eliminate puckering on knit fabrics and bias seams, while allowing the seam to be pressed completely open flat. #07 New sculpture stitch: Satin stitch foot F This stitch is used for topstitches and outline-stitches enhancing the design appearance. 37
Machine settings q Pattern: w Presser foot: e Needle thread tension: #01 Zigzag foot A 1–3
Gathering with straight stitches works best on light to medium weight fabrics. Pull on the bobbin threads simultaneously from each end of the fabric until the desired amount is gathered. OR Lay gather fabric over flat fabric and sew the two fabrics together directly on the second row of gathering stitches. 39
Machine Settings q Pattern: w Presser foot: e Needle thread tension: #01 Zipper foot E 2–6
When sewing with the zipper foot, make sure to use pattern 01 (straight stitch with the center needle position). Lapped Application Lapped zippers are usually inserted into a side seam of skirts or pants, for example. To sew the left side of the zipper, attach the zipper foot on the right-hand side. To sew the right side of the zipper, attach the zipper foot on the left-hand side. Place right sides of fabric together and sew the seam located below zipper placement. (Make sure to reverse sew the stitches directly below the zipper placement. Teeth are on the seam line and zipper top is 1 cm (3/8˝) from fabric top edge. Turn zipper face up (right seam allowance forms a small fold at basting line) and smooth zipper teeth away from seam. Starting at the bottom, sew through the folded seam allowance and zipper tape. Stop just before the zipper foot reaches the slider on the zipper tape. Close the zipper and spread the fabric flat with the right side facing up. Guide the edge of foot along the zipper teeth and stitch through the garment and zipper tape. Raise the foot, remove the basting stitches from seam line and open the zipper. Lower the foot and stitch the remainder of the seam, making sure the fold is even. 43
q w e Machine Settings q Pattern: w Presser foot: e Needle thread tension: #08 Zigzag foot A 3–7
The zigzag stitch is a very versatile stitch. Use the zigzag to finish raw seam edges, sew narrow hems, sew satin stitch appliques and create beautiful monograms. Adjusting Stitch Width When you activate the stitch width mode, the stitch width can be altered between 0. [. . . ] If stretch stitch patterns are distorted, correct it with the fine adjustment dial q. Q Fine adjustment dial w Standard position e Setting mark q e w (A): If the pattern is compressed, turn the fine adjustment dial in the direction of “+”. (B): If the pattern is drawn out, turn the fine adjustment dial in the direction of “–”. CARE AND MAINTENANCE
Replacing the Light Bulb WARNING:
Turn the power off before replacing the light bulb. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELNA EXPERIENCE 520
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELNA EXPERIENCE 520 will begin.