Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELRO (ROOS ELECTRONICS) KT200TS. We hope that this ELRO (ROOS ELECTRONICS) KT200TS user guide will be useful to you.
Lastmanuals help download the user guide ELRO (ROOS ELECTRONICS) KT200TS.
Manual abstract: user guide ELRO (ROOS ELECTRONICS) KT200TS
Detailed instructions for use are in the User's Guide.
[. . . ] When finish selected days program setting. Press OK under display to save the setting program and return to normal display 3) Press SET to save setting and enter next feature setting. 4) Press OK to save setting and return to normal display. [. . . ] Heating or Cooling will start 5 minutes early for every 1'F of temperature required to reach set point. 2) Press SET to save setting and enter next feature setting. 2) Press OK to save setting and return to normal display. DLY displays at bottom, oF or oN in the middle and select button at its left, HEAT displays at right. Press SET six times to enter the "dLY" setting to select lockout oF (OFF) or oN. The lockout will enable 5 minutes waiting between each heating cycle. 2) Press SET to save setting and enter next feature setting. 3) Press OK to save setting and return to normal display. TPAd displays at bottom, room temperature at top right and adjust value and its adjust at bottom right. Press SET seven times to enter the "Tpad" setting button to adjust display temperature. The thermostat was accurately calibrated at the factory but you have option to change the display room temperature to match your previous thermostat 2) Press SET to save setting and enter next feature setting. 3) Press OK to save setting and return to normal display. This temperature setting will be hold until it stop. Battery low alarm, when battery is low, LOWBTY displays and flashes at top. For connecting the thermostat, you need to open the thermostat where the terminal block is located. the terminal block is extra-protected see the sticker on the compartment. [. . . ] Use only ALKALINE batteries (Check this on the batteries). No display: - Batteries empty: - Batteries are not properly installed (polarity) Boiler does not switch on, wheel is turning: - Wrong type battery installed, use only alkaline batteries. - Batteries almost empty - Wire connection disjointed by the coronet connection - Boiler not properly connected Thermostat does not switch on, wheel is not turning: - Temperature set too low - Program is manually bridged - Switch stands on Off Temperature cannot be properly adjusted: - Thermostat is placed too close near a radiator or window. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELRO (ROOS ELECTRONICS) KT200TS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ELRO (ROOS ELECTRONICS) KT200TS will begin.
