User manual EMERSON HD6000

[. . . ] 4. ) Do not block any ventilation openings. Install in accordance with the manufacturer' instructions. s 5. ) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. ) Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] If you live in the Eastern Time zone, there' nothing else to do. Your clock is set correctly s and running. If you do not live in the Eastern Time zone you must change the default zone display to your own zone. You only do this one time and the SmartSet® will remember the new default zone setting and will always return to that setting after a power interruption There are 7 time zones programmed into your SmartSet® clock radio as follows: ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 -- -- -- -- -- -- -- Atlantic Time Eastern Time Central Time Mountain Time Pacific Time Yukon Time Hawaiian Time (Default Setting) To change the default time zone display, depress the TIME ZONE button. The number "2" will appear on the display indicating that the default zone is ZONE 2, Eastern Time. Hold the TIME ZONE button and then press either the SET (Up) or SET (Down) buttons until your own time zone appears on the display, then release the buttons. The clock display will change to the correct time in the time zone you selected. The clock will always return to the correct time in the zone you selected after every power interruption. If you move to a different time zone, simply change the default zone display to the new zone and the SmartSet ® will remember that setting for you. 8 HD6000_110606. p65 8 6/11/2006, 9:47 Date Display To see the correct Date at any time, depress the MONTH/DATE button. The display changes from Time to Month and Date (MM/DD). You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. 3. ) Press the RADIO ON/OFF button to turn the radio ` . On' 4. ) Select your desired station with the TUNING control on the right side of the cabinet. 5. ) Adjust the VOLUME control to the desired setting. 6. ) When you are finished listening, press the RADIO ON/OFF button to turn the radio ` . Off' Antenna Information AM ­ The AM bar antenna is inside the cabinet. If AM reception is weak, change the position of cabinet until the internal antenna picks up the strongest signal. FM ­ The FM antenna is built in to the AC power cord. If FM reception is weak try varying the position and direction of the power cord until you find the strongest signal. 13 HD6000_110606. p65 13 6/11/2006, 9:47 Wake To Radio 1. ) Turn the radio ` and select the band, station, and volume level that you wish On' to hear when the alarm comes on, then turn the radio ` Off'again. 2. ) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 3. ) Set the ALM selector switch for one or both alarms to the "RADIO" position. The appropriate ALM 1 and/ or ALM 2 indicators will light up to confirm that the alarms are set. 4. ) At the selected wake up time the radio will turn ` . [. . . ] (Up) 19 HD6000_110606. p65 19 6/11/2006, 9:47 4. ) Depress the MONTH/DATE button. The display will change from ` Time' to ` Month/Date'(MM/DD). While holding the MONTH/DATE button, press the SET (Up) button to set the display to the correct Month and Date. The Day indicator will change automatically as you adjust the Month/Date settings. [. . . ]