Detailed instructions for use are in the User's Guide.
[. . . ] Then release them, the Brands will be displayed on the LCD screen. Or key to select the brand of your device (e. Press the Tesla), confirm by OK key, then LCD shows "Success!POWER CH+ CH- VOL+ VOL/MUTE), if none of the keys of your new remote control can work, or most of the keys work improperly, or keys, until all basic functions operate please try another brand code by the properly. [. . . ] Check the function of the key - see if the device reacts, if not, try to run learning again. DELETE THE LEARNT KEY If you like to delete a learnt command, you can follow the steps as below: TV ) which the command you like to delete from. Press and hold the SET key for more than 3 seconds, then release it. Press KEY", press the key which should be deleted, , , SURE DELET" appears, confirm then by OK key, LCD shows "Success!Repeat step 3 to delete next keys, exit to the normal mode by pressing the device key. Press and hold the SET key for more than 3 seconds, then release it. Press DEV", press the device key which should be deleted, , , SURE DELET" appears, confirm then by OK key, LCD shows "Success!", all keys of selected device are deleted. Repeat step 2 to delete next devices, exit to the normal mode by pressing the EXIT key. Press and hold the SET key for more than 3 seconds, then release it. Press ALL", , , SURE DELET" appears, confirm then by OK key, LCD shows "Success!Press and hold the SET key for more than 3 seconds, then release it. LCD shows "SET UP", confirm by OK key, LCD shows , , SELECT KEY". This means you want to turn the TV(Device) power on(function), input toAV(function) and DVD(Device) power on(function). After setting of maximum 10 keys, confirm by OK key, LCD shows "Success!Press and hold the SET key for more than 3 seconds, then release it. SET UP THE CLOCK You can set up the clock on your remote control and the time will be displayed 1. Press and hold the SET key on your remote control for more than 3 seconds, then release it. Press the or key to select desired setup items such as "Hour, Minute, AM or PM", then enter value by the digit keys, confirm then by OK key. VOLUME LEVEL LOCK This function makes it very convenient when you only use one device to adjust volume. For example, you may use your amplifier as your main volume control, then you can use this function to fix the volume and mute key of AUX, no matter which device you will use (even you will use TV, DVD, VCR etc), the volume and mute key on remote control still control the volume and mute of your amplifier. Press and hold the SET key on your remote control for more than 3 seconds, then release it. [. . . ] To return to beginning status, please press the EXIT key or the device key (e. ) , , , , OK, EXIT are only used in the set up mode to set2. The keys up your universal remote control. You can't control your device as normal menu function during the setup. [. . . ]