User manual EMTEC HDD PHOTO CUBE

[. . . ] Note: -Do not disconnect the unit to computer when it is reading or writing data. -Do not remove the unit from USB cable or remove USB cable from computer directly just after transferring. Please consult the reference of operating in USB mode in the latter part of this instruction. P5 -Left Side : CF/MD Card Slot -If you want to copy the data within CF/MD flash card, please open the card slot cover on left side and insert the flash card with face upward carefully. [. . . ] -In USB mode, the unit will be charged by the aid of USB cable when it is off. However, it will only be supported with electronic power but not be charged through USB cable when it is on. To avoid lack of power when the unit is used in USB mode, please connect the DC power adapter during your usage. P10 6. Partition the Harddisk ­ supposed under WINDOWS 2000/XP system : 1) Click "START" menu on the task bar and select "SETTINGS" / "CONTROL PANEL" / "ADMINISTRATIVE TOOLS" / "COMPUTER MANAGEMENT". Then Computer Management Window is opened. 2) Click on "DISK MANAGEMENT", and disk drives currently connected to the system will be listed on the right side. Find out the disk that indicates the portable harddisk. 3) To delete an existing partition, right click on the drive and select "DELETE PARTITION". 4) To create a new partition, right click on the drive and select "NEW PARTITION". This will open the New Partition Wizard. 5) Select "PRIMARY PARTITION" or other types as you want and click "NEXT". 6) Because you can only create FAT32 partition, set the partition size to 32000MB or less and click "NEXT' ("Disk Management" can not create FAT32 partitions larger than this). 7) Assign a drive letter and click "NEXT". 8) Set the file system to FAT32 and click "NEXT". (If FAT32 is not listed as an option, go back to step6 and reduce the size to 32000MB or less. ) 9) Click "NEXT" to confirm settings. 10) Click "FINISH" to close the wizard and start the partition and format process. Note: -Only FAT32 is supported for harddisk formatting and maximum 4 partitions. Each partition memory can not be over 32GB. -To avoid the unit being shut down when it is working with not enough power, please connect DC power adapter to it during the process of partition. P11 7. Backup of Flash Card Data : 1) Insert flash card into card slot. 2) Press on [Copy] button and the unit begins to back up the data. 3) When the LCD displays 100%, backup is finished. [. . . ] 1) The problems occurred in USB mode : ·If you use the USB port in the front of the computer but the computer can not recognize the unit, please try the USB port behind. When you turn on the unit next time, the LCD will still display the available memory size of the first partition. P15 13. Specification : Subjects Build-in harddisk Power sources USB Supported format Supported OS Operating temperature Storing temperature Humidity Details Supports 40/80/120GB harddisk Inner: rechargeable lithium ion battery Outer: DC power adapter USB 2. 0 high speed Harddisk: FAT32 Flash memory card: FAT16/FAT32 Windows 2000 SP3 or above Windows ME/XP 0°C50°C -20°C55°C Maximum 90% P16 14. Appendices: Error Code List : Error Code Harddisk's Error 01 02 03 04 Copying Error 51 52 53 Flash Card's Error 61 62 Details Fail to recognize the harddisk. [. . . ]