User manual ENCORE ENDSL-A2 PLUS 4R2 DATA SHEET

[. . . ] [. . . ] ENDSL-A2+4R2 use advanced ADSL chipset solution with complete set of industry standard features for high-speed ADSL, ADSL2 and ADSL2+ Internet access. ENDSL-A2+4R2 offer easy installation and cost-effective connection for SOHO and residential users. To benefit users' access to the Internet, 4-port 10/100Mbps Ethernet switch hub is equipped with this ADSL router. Also the feature-rich routing functions are seamlessly integrated to ADSL service for existing corporate or home users. Features: Full rate operation with up to 24Mbps downstream data rate and up to 1Mbps upstream data rate enables High-speed Internet access Friendly GUI Configuration and Management Ongoing feature enhancements through FTP / TFTP (Web-based) download or upload of new firmware and configuration files Provides ALG's to support most major applications, such as MSN Messenger, CUSeeMe, ICQ, IRC, LDAP, PPTP, FTP, Quake, SIP, H. 323, NetBios Over TCP/IP Enables end-to-end ATM support, which allows traffic management and QoS Built-in DHCP server automatically assigns IP addresses to all workstations on your LAN All management and monitoring can be done through Telnet session UPnP support Auto negotiating rate adaptation Specifications: ADSL Compliant: ANSI T1. 413 issue 2 ITU-T G. 992. 1 (G. dmt) ITU-T G. 992. 2 (G. lite) G. 994. 1 (G. hs, Multimode) ITU-T G. 992. 3 (ADSL2 G. dmt. bis) ITU-T G. 992. 4 (ADSL2 G. lite. bis) ITU-T G. 992. 5 (ADSL2+; Annex A, B, I, J, L & M) Reach Extended ADSL (RE ADSL) ATM and PPP Protocols: Support up to 8PVCs ATM Forum UNI 3. 1/4. 0 PVC Traffic Shaping UBR, CBR, VBR, GFR Multi Protocol over AAL5 (RFC1483 / 2684) RFC2516 (PPP Over Ethernet) RFC2364 (PPP Over ATM) VC and LLC Multiplexing PPP over Ethernet (RFC 2516) PPP over ATM (RFC 2364) Traffic Shaping (ATM QoS) UBR, CBR, VBR, VBR-rt, VBR-nrt OAM F4 and F5 segment end-to-end loop-back, AIS and RDI OAM cells VPI is 0-255 and VCI is 1-65535 Bridging and Routing: Ethernet to ADSL self-learning Transparent Bridging (IEEE 802. 1d) IP routing-RIPv2 (backward compatible with RIPv1) Static IP routing Routing (TCP/IP/UDP/ARP/ICMP) IP Multicast IGMP v1/v2 IP Management NAT (Network Address Translation) NAPT (Network Address and Port Translation) DHCP Server / Relay / Client (WAN Port) VPN (IP Sec, PPTP, L2TP) Pass-Through DNS Proxy Dynamic DNS, UPnP support Virtual Server (Port Forwarding) and DMZ host Security PPP over PAP (Password Authentication Protocol; RFC1334) PPP over CHAP (Challenge Authentication Protocol; RFC1994) DoS Protection Stateful Packet inspection (SPI) Built-in NAT Firewall IP Based packet filtering Password Protected System Management Web Based Management Web-based GUI Configuration / Management Command-line Interpreter (CLI) via serial interpreter or Telnet over Ethernet Telnet Remote Management Firmware upgrade via FTP / TFTP Support SNMP Built-in Diagnostic tool Interface One USB port compliant with USB v1. 1, full speed (12Mbps) Four RJ45 ports compliant with IEEE 802. 3/802. 3u, 10/100Mbps auto selection One RJ11 port for ADSL connection One reset button for restoration of factory default setting One Power ON/OFF switch LED Indicators Power, WAN, ADSL, LAN X 4 Power Adapter Power Adapter: Input 110 ± 10 or 230 ± 10 VAC, Output 12VDC 600mA Dimensions (app) 155 mm (Length) x 101 mm (Width) x 32 mm (Height) Net Weight (app) 500 g Operating Temperature 0°C ~ 70°C Humidity 5% ~ 95% (Non condensing) Storage Temperature -20°C ~ 70°C Support Operating System Windows® 998SE, ME, 2000, XP, Windows VistaTM, MAC® OS X Regulations / Approvals FCC Part 15, CE, LVD [. . . ] [. . . ]