User manual ENCORE ENL832-TX-EN

[. . . ] ENL832-TX-EN 10/100Mbps Fast Ethernet LAN Card User's Guide FCC COMPLIANCE STATEMENT This ENL832-TX-EN has been tested and found to comply with the limits of a Class B computing devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. 1 For Windows Vista, XP, and 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. 2 For Windows ME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. 3 For Windows 98SE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1 1. Features & Specifications 1. 1 Features & Benefits * Supports 32-bit PCI Bus Master for high performance and low processor utilization. * Complies to PCI 2. 1 and PCI 2. 2 specification * Complies with the IEEE 802. 3 CSMA/CD, 10/100Base-TX standard. * Full duplex design to double the performance to 20Mbps/200Mbps. * One STP connector for 100Mbps or 10Mbps network speed. * Support Auto-negotiation function. * Built-in FIFO buffers to eliminate external memory. * Supports early interrupt on transmit to increase performance. * Supports Novell NetWare, Windows NT/98/ME/2000/XP/Vista and other popular operating systems * Provides diagnostic software * Wake on LAN (If adapter supports WOL function). * Topology : Star * Connect to : RJ-45 1. 2 Standard & Specification * Standard: IEEE 802. 3 10BaseT IEEE 802. 3u 100BaseTX * Transmission Rate: 10Mbps or 100Mbps * Hardware Required: IBM compatible PC with available PCI slot ( PCI 2. 1 or PCI 2. 2 ) * IRQ Line: Assigned by system * I/O Address : Assigned by system * Temperature : 0 to 55 C (Operating) * Humidity : 10% to 90% (Non-condensing) * Power consumption : 1. 8W (Max. ) * Support OS: Novell NetWare, Windows NT/98/ME/2000/XP and other popular operating systems 2 2. Turn off the computer and remove its cover. 2. Secure this adapter to the rear of the computer chassis and put back the computer cover. Connect the adapter to the network using twisted-pair cable. Connect the NIC and the PC mother board with WOL cable. [. . . ] Click OK to continue: 10 Step 5: Click OK to continue. Step 6: When operating system finishes loading LAN card files, window below will appear. Click OK to reboot the system, when your system boots up again, you are ready to use the LAN card. 11 [. . . ]