User manual ENCORE SOHO WIRELESS INTERNET CAMERA

[. . . ] SOHO Wireless Internet Camera User's Guide Version 2. 0 1 TABLE OF CONTENTS ABOUT THIS GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 FEATURES AND BENEFITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 UNPACKING THE PACKAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SYSTEM REQUIREMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PHYSICAL DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2. HARDWARE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 ATTACHING THE CAMERA TO THE STAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 CONNECTING THE ETHERNET CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ATTACHING THE POWER SUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3. SECURITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 4. [. . . ] You can select the Input IP button, an Input IP dialog box will appear as illustrated below. Enter the IP Address of the camera in the specified field and click the Add button to add a new camera. Note: 1. If you want to add a camera through the Internet, you must key in a physical IP Address. When the camera is installed behind Gateway and the Open Second Port of camera/Port Forwarding of Gateway function is enabled, the Gateway IP address has to be entered with the Port Number as below: 62 3. At the same time, the Gateway IP address can be replaced by URL as below: 4. If you forget the IP Address that you want to add, a dialog box will appear to notify you of the error. If you are unsure of the IP Address of the camera, you can click the Browse button, the Browse Camera dialog box will appear with a blank screen as illustrated below. 63 You must select the camera and click the Add button to add a new camera. If the Login Camera dialog box appears, make sure to enter the correct User Name and Password and click the OK button. Then, the camera will be added into IPView SE in list format. If the User Name and Password is entered incorrectly, the camera will not be added into IPView SE. The above dialog box will appear only if administrator has already set up the User Name and Password in the Web Configuration setting. If you forget to highlight the camera you want to add, a dialog box will appear to notify you of the error. Make sure to save any changes you have made to keep the information updated. 64 Note : You are allowed to add only one camera at a time. When the user adds the camera, four icons will appear, including: "Assign IP to Camera", "Connect/Disconnect", "Erase", "Extra Information". Camera Config Assign IP to Camera Connect / Disconnect Erase Motion record Schedule record Manual record Extra Information 65 How to Change Camera Assign IP of New Camera To change camera, click the "Assign IP of Camera" button. An Assign IP of Camera dialog box will appear as illustrated below. You must select the camera and click the Add button to add a new camera. 66 Connect/Disconnect the Image Connect the Image Click the "Connect/Disconnect" button and the preview screen will appear with the video image. NOTE: When a new camera is added, it is connected. If you click the "Connect/ Disconnect" button, it will be in disconnecting, also, no image showed. Minimize Click to minimize the display screen of the camera. Maximize Click to maximize the display screen of the camera. Close Click to close the display screen of the camera. 67 Always on top Click to have the display screen always appear on the top of the window. Wake up control panel Click to open the control panel again when it is closed. Color setting Click to adjust color of the image. View list Click to check the event list of the camera. Snapshot Click to snapshot a picture from the camera. Rotate image Click to rotate the image of the camera. Zoom Click to zoom in/out the image of the Internet Camera. 68 Disconnect the Image Click the "Connect/Disconnect" button, and the camera will be disconnected. 69 How to Delete a Camera Erase Camera To delete a camera, you must select the camera to delete from the IPView SE control panel. Then, click the "Erase Camera" button. After deleting the camera, the IPView SE control panel will appear as below. 70 Extra Information Extra Information The screen displays the camera's information. 71 How to Adjust the Property Setting System Configure From the control panel, select the button and the dialog box will appear as shown below. Log Storage: 1. Single HDD Reserve Space This option permits reserved HDD space from 500 MB to 1000 MB. Split Recording File From this option, you can adjust the file size for recording the video images (the default setting is 10MB). If the recorded video files reach the file size, video images will be recorded into another file automatically. By File Size - permits recording by file size from 10 MB to 50 MB. 72 3. Storage List This option is used to define the path to save image files. The software will create a camera name folder as the "Storage List" which is allowed to create up to 16 File Path. [. . . ] Still other protocols dictate how data is transferred across the medium, and how servers respond to workstation requests and vice versa. Common network protocols responsible for the presentation and formatting of data for a network operating system are the Internetwork Packet Exchange (IPX) protocol or the Internet Protocol (IP). Protocols that dictate the format of data 103 PPPoE Protocol for transferors the medium include token-passing and Carrier Sense Multiple Access with Collision Detection (CSMA/CD), implemented as token-ring, ARCNET, FDDI, or Ethernet. The Router Information Protocol (RIP), a part of the Transmission Control Protocol/Internet Protocol (TCP/IP) suite, forwards packets from one network to another using the same network protocol. R RARP Reverse Address Resolution Protocol, a TCP/IP protocol that allows a physical address, such as an Ethernet address, to be translated into an IP address. RJ-45 RJ-45 connector is used for Ethernet cable connections. A router is the network software or hardware entity charged with routing packets between networks. Router S Server It is a simple computer that provides resources, such as files or other information. [. . . ]