User manual EPSON 2400

[. . . ] Lexmark Forms Printer 2400 Series User’s Guide Edition: June 2000 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] Default font Select the font you want from the available fonts listed. Font Lock Enabling this setting lets you set Font Lock as the default even after the printer is turned Off and back On. Default Pitch Select from the following pitches: 10, 12, 15, 17, 20, (24 for 2490/2491), and PS pitch. Not all pitches are available in all fonts. Pitch Lock Enabling this setting lets you set Pitch Lock as the default even after the printer is turned Off and back On. Code Page You may select one of the following code pages: 437, 850, 858, 860, 861, 863, 865, 437G, 813, 851, 853T, 857, 869, 920, 1004, and 1053. Refer to the Technical Reference for more information. Character Set You may select Character Set 1 or Character Set 2. € Character Set 1 is the factory default for the U. € Character Set 2 is the factory default for EMEA. Character options Using Setup mode 96 Macro options (continued) Use these menu When you want to customize… options Character options (continued) 20-Pitch This setting enables or disables the 20-pitch mode, and provides compatibility with other IBM printers. Note: Available for the 2480/2481 printers • When set to Enable, switching from 12 cpi to condensed (Dec 15, Hex 0F) changes the pitch from 12 cpi to 20 cpi. € When set to Disable, switching from 12 cpi to condensed (Dec 15, Hex 0F) does not change the pitch. Paper handling options Auto Tear Off • When set to On, Auto Tear Off moves continuous form paper to the Tear Off bar. € When set to One Second, continuous form paper automatically advances to the Tear Off bar after a one second delay in receiving data. € When set to Off, you can manually advance the perforation of a continuous form to the Tear Off bar. Auto Cut Sheet Load • When set to On, paper is loaded into the manual feed tray, the printer automatically loads the paper to the current Top-Of-Form. • When set to Off , press FormFeed to load paper. Auto Sheet Feeder If you installed the optional Auto Sheet Feeder, turn the Auto Sheet Feeder setting On to automatically load paper into the printer. Tractor Lets you select the default tractor if the optional tractor is installed. Selecting Tractor 1, Tractor 2, or Tractor 1+ 2 makes the specified tractor or tractor set the default. Form Length You may set the form length (in lines per page) from one line to a maximum of 22 inches. [. . . ] Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, or damaged beyond repair. Also, such product must be free of any legal obligation or restrictions that prevent its exchange. Before you present this product for warranty service, remove all programs, data, and removable storage media. For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, please contact Lexmark at 1-800-LEXMARK (1-800539-6275), or on the World Wide Web at www. [. . . ]