User manual EPSON ACULASER C9300N

[. . . ] User’s Guide NPD4505-00 EN Epson AcuLaser C9300 Series User's Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. [. . . ] CompactFlash Full The optional CompactFlash memory is full and you cannot save any data. Delete the unnecessary data from the CompactFlash memory. To clear this error, select Clear Warning from the control panel’s Reset Menu. For instruction about accessing the control panel menus, see “How to access the control panel menus” on page 60. Cooling Down The printer is cooling down. This is not an error message, and will clear itself. Correct time using Time Setting Using the Control Panel 93 Epson AcuLaser C9300 Series User's Guide The current time setting is reset because you did not connect the power cord for a long time. To clear this error, select Time Setting from Clock Menu and specify the current date and time. Dev Unit uuuu Needed Soon This message indicates that the development unit is near the end of its service life. You can continue to print until the Replace Dev Unit uuuu message appears. To clear this warning message and continue printing, select Clear All Warnings from the control panel’s Reset Menu. For instruction about accessing the control panel menus, see “How to access the control panel menus” on page 60. DM Error yyy An inappropriate Duplex Unit is installed. Duplex Memory Overflow There is not enough memory for duplex printing. The printer prints only on the front and ejects the paper. To clear this error, follow the instructions below. If Off is selected as the Auto Cont setting on the control panel’s Setup Menu, press the Start/Stop button to print on the back of the next sheet, or press the W Pause/Cancel button to cancel the print job. If On is selected as the Auto Cont setting on the control panel’s Setup Menu, printing continues automatically after a certain period of time. Feed Roller MP Needed Soon, Feed Roller C1 Needed Soon, Feed Roller C2 Needed Soon, Feed Roller C3 Needed Soon, Feed Roller C4 Needed Soon This message indicates that the feed roller C2, C3, or C4 is near the end of its service life. You can continue to print until the Replace Feed Roller MP, Replace Feed Roller C1, Replace Feed Roller C2, Replace Feed Roller C3, or Replace Feed Roller C4 message appears. To clear this warning message and continue printing, select Clear All Warnings from the control panel’s Reset Menu. For instruction about accessing the control panel menus, see “How to access the control panel menus” on page 60. [. . . ] Quit Print & Fax (for Mac OS X 10. 5 or later) or Printer Setup Utility (for Mac OS X 10. 4). Using the PCL6 printer driver To print in the PCL mode, you will have to install the printer driver. Consult the customer support in your region regarding how to get the printer driver and system requirements such as the versions of supported operating systems. About the Printer Software 190 Epson AcuLaser C9300 Series User's Guide Appendix A Technical Specifications Paper Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Available paper types Paper type Plain paper Envelopes Description Weight: 60 to 80 g/m2 (Recycled paper is acceptable. *) No paste and no tape. (unless specifically designed for laser printers. ) The backing sheet should be covered completely, with no gaps between labels. [. . . ]