User manual EPSON AL-M400

[. . . ] Refer service or repairs, other than those described in the operating instructions, to a professional service person. This product is designed, tested and approved to meet strict global safety standards with the use of specific Lexmark components. [. . . ] The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts. Your product uses a laser, exercise CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Your product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions. European Community (EC) directives conformity This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. A declaration of conformity with the requirements of the Directive has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S. This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950. Acoustics 1-Meter Average Sound Pressure, dBa Printing Idling 48 dBa 35 dBa Apéndice D: Avisos 91 Laser notices The following laser notice label may be affixed to this printer: Avis relatif à l’utilisation de laser Pour les Etats-Unis : cette imprimante est certifiée conforme aux provisions DHHS 21 CFR alinéa J concernant les produits laser de Classe I (1). To conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825. [. . . ] To conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. [. . . ]