User manual EPSON C82434*

[. . . ] Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. EPSON and EPSON ESC/P are registered trademarks and EPSON Stylus is a trademark of SEIKO EPSON CORPORATION. NetWare and Novell are registered trademarks of Novell, Inc. [. . . ] See "About EpsonNet Internet Print" on page 190 for more details. Microsoft Network Shared printing 1. Click Start, point to Settings, and then select Printers. Select the Network printer server radio button and then click Next. The Connect to Printer dialog box appears. Select the printer you want to configure from the Shared Printers list. If you cannot select the printer, enter the following in the Printer box: \\NetBIOS name of print server\Device name of print server 5. Follow the on-screen instructions to set up the printer. See "Installing a printer driver" on page 130 if necessary. Installing the Printer Driver 129 Installing a printer driver 1. Insert the software CD-ROM shipped with the printer. Close the EPSON Installation Program screen if it appears. The Install From Disk dialog box appears. Click the Autostart tab. Installing the Printer Driver 134 5. Select lprportd from the Services to autostart list. Check the Autostart service check box, and select the Detached radio button. 6. Save the settings you made in the TCP/IP Configuration dialog box, and restart your computer. Setting up your printer 1. Double-click Template from the OS/2 System folder. Drag Printer to your desktop to create a printer. Double-click the Printer icon. Installing the Printer Driver 135 4. Select Properties from the control menu, then click the Output Port tab. 5. From the Output Port list box, select one from \PIPE\LPD0 to \PIPE\LPDn (where n is the maximum number of LPD ports). The \PIPE\LPD -Settings dialog box will appear. Installing the Printer Driver 136 6. Enter the IP address of the print server in the LPD server box. [. . . ] Note: Use NetBEUI printing if you do not want to go through these steps. See the manual of the Dial-Up router for more information on scorp range, bind, exclusive address of the DHCP function. Tips for Administrator 245 Function of Universal Plug and Play When you connect your printer to the network, the printer is automatically assigned with an IP address, and the printer's icon appears in the My Network Places folder. By double-clicking the printer's icon, you can access EpsonNet WebAssist for basic information about the printer, such as manufacturer, model name, location, and administrator's name. Right-click the printer's icon in the My Network Places folder and select Properties. [. . . ]