User manual EPSON C82437*

[. . . ] EpsonNet 802. 11b/g Wireless and 10/100 Base Tx Ext. Print Server No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. [. . . ] Run the command prompt and enter the following command. NET USE printer port: \\NetBIOS name of network interface\Device name of network interface Chapter 1 Installing Components and Setting Up the Network Interface 119 Selecting the port 1. Click Start, point to Settings, and then select Printers. Right-click the printer icon and then select Properties. Click the Ports tab and then select the port you have set using the NET USE command. Macintosh Follow the steps below to set a device. Note: Make sure that the printer driver is installed on your Macintosh before following the steps below. See the manual shipped with your device for instructions on how to install the printer driver. Mac OS X Bonjour/Rendezvous printing 1. Open Print Center (for Mac OS X 10. 2 or below) or Printer Setup Utility (for Mac OS X 10. 3 or later), and then click Add. For Mac OS X 10. 4, select the printer model that is connected with Bonjour. For Mac OS X 10. 2 or 10. 3, select Rendezvous from the drop down list, and then select the printer model from the list. Click Add. Chapter 1 Installing Components and Setting Up the Network Interface 120 TCP/IP printing 1. Open Print Center (for Mac OS X 10. 2 or below) or Printer Setup Utility (for Mac OS X 10. 3 or later), and then click Add. For Mac OS X 10. 4, click More Printers, select EPSON TCP/IP from the drop down list, and then select the printer model. For Mac OS X 10. 2 or 10. 3, select EPSON TCP/IP from the drop down list, and then select the printer model from the list. Open Print Center (for Mac OS X 10. 2 or below) or Printer Setup Utility (for Mac OS X 10. 3 or later), and then click Add. For Mac OS X 10. 4, click More Printers, select EPSON Apple Talk from the drop down list, select the zone from the drop down list, and then select the printer model. For Mac OS X 10. 2 or 10. 3, select EPSON Apple Talk from the drop down list, select the zone from the drop down list, and then select the printer model from the list. Click Add. Chapter 1 Installing Components and Setting Up the Network Interface 121 Mac OS 9 AppleTalk printing 1. Close Chooser. Chapter 1 Installing Components and Setting Up the Network Interface 122 Setting the Scanner Driver You can scan images via a network. For details on the scanning function, see the documentation shipped with your device or the online help for EPSON Scan. Note: If the network connection is interrupted while starting up EPSON Scan, quit EPSON Scan and restart it after a short time. If you cannot restart EPSON Scan, turn the all-in-one off and on once and then restart EPSON Scan. [. . . ] Connected to the computer directly Connected to the wireless LAN Chapter 4 Problem Solver 234 Cancel printing when an error occurs When the printer error dialog box appears and then you click the Cancel button, printing is canceled if the printer or all-in-one is connected directly to the computer. However, printing is not canceled if the printer or all-in-one is connected to the wireless LAN. Follow the on-screen instructions to clear the error first, and then see steps 1 to 3 below if you are using Windows, or step 3 only if you are using Macintosh. For Windows Vista, click the Start menu, click Control Panel, and then click Printer. [. . . ]