User manual EPSON DX8400 START HERE

[. . . ] Select Technical Support Web Site and click Paper jam Paper has jammed in the printer. . Press the b maintenance button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press the b maintenance button to resume printing. For further information on the customer support services available in your area, see the online Reference Guide. Fb Ink low The black or color ink cartridge is nearly empty. Obtain a replacement black (T036) or color (T037) ink cartridge. To determine which cartridge is nearly empty, check the ink level using EPSON Status Monitor 3 (Windows) or EPSON StatusMonitor (Macintosh). 3. [. . . ] Open the printer cover and remove any paper or other obstructions from the paper path by hand. If the error does not clear, contact your dealer. FP Fb Unknown printer error An unknown printer error has occurred. Turn off the printer and contact your dealer. For users of Mac OS 9 or earlier 1. Insert the printer software CD in the CD-ROM drive. Double-click the EPSON icon, select Install Software, and then click . O = on, N = off, F F = flashing Safety Instructions Read all of the instructions in this section when setting up and using your printer. When choosing a place for the printer Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer away from direct sunlight, strong light, or heat sources. Avoid places subject to dust, shocks, and vibrations. Leave enough room around the printer to allow for sufficient ventilation. Place the printer near a wall outlet where the plug can be easily unplugged. Place the printer on a flat, stable surface that extends beyond the printer base in all directions. If you place the printer by the wall, leave more than 10 cm between the back of the printer and the wall. The printer will not operate properly if it is tilted at an angle. After installing the software, choose Chooser from the Apple menu, and then select the icon for your printer and the port that your printer is connected to. 4. Press the H ink button. The printer begins ink charging. While charging, the printer produces a variety of mechanical sounds. When the green lamp stops blinking, ink charging is complete. Unplug the printer and refer servicing to qualified service personnel under the following conditions: The power cord or plug is damaged; liquid has entered the printer; the printer has been dropped or the cabinet damaged; the printer does not operate normally or exhibits a distinct change in performance. Do not insert objects through the slots in the printer's cabinet. Take care not to spill liquid on the printer. Removing the cartridges can dehydrate the printer head and may prevent the printer from printing. Information for United Kingdom Users Use of options EPSON (UK) Limited shall not be liable against any damages or problems arising from the use of any options or consumable products other than those designated as Original EPSON Products or EPSON Approved Products by EPSON (UK) Limited. When choosing a power source For Mac OS X users 1. Insert the printer software CD in the CD-ROM drive. Double-click the Mac OS X Driver folder, and then double-click the C42Series. pkg icon inside it. If the Authorization window opens, click the key icon, enter the administrator's name and password, click OK, and then click Continue. c Caution: Do not turn the power off during the ink charging process. Do not load paper until ink charging is complete. Safety information Warning: Refer to the rating plate for the voltage and check that the appliance voltage corresponds to the supply voltage. Important: The wires in the mains lead fitted to this appliance are coloured in accordance with the following code: Blue -- Neutral Brown -- Live If you have to fit a plug: As the colours of the mains lead of this appliance may not match the coloured markings used to identify the terminals in a plug, please observe the following: The blue wire must be connected to the terminal in the plug marked with the letter N. [. . . ] Follow the on-screen instructions to install the printer software. After installing the software, follow the instruction below to select your printer: Double-click Macintosh HD. Click Add. When handling ink cartridges All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. [. . . ]