User manual EPSON EB-826W

[. . . ] Net/ (other than Europe) ❏ Start Here (paper): Provides you with information on setting up the product and installing the software.  Basic Guide (paper): Provides you with basic information when you are using the product without a computer. This manual may not be included depending on the model and region.  User’s Guide (PDF): Provides you with detailed operating, safety, and troubleshooting instructions. [. . . ] Follow the instructions to make settings to receive faxes automatically. For instructions on receiving faxes manually, see the PDF User’s Guide. H I A B C Repeat step 7 to add other speed dial entries to the group dial list. You can register up to 30 speed dial entries in a group dial. Press OK to finish creating a group dial list. A B C D Load plain paper in the rear paper feed. Fax Settings > Send/Receive Setup > Auto Answer > On Sending Faxes Place your original(s) in the Automatic Document Feeder or on the scanner glass. & “Placing Originals” on page 6 Press K to enter the fax mode. Use the keys on the numeric keypad to enter the fax number. If you want to send the fax to more than one recipient, press OK after entering a one fax number, and select Yes to add another fax number. Note: ❏ To display the last fax number you used, press . Epson recommends filling all ink tanks to the upper line when the product is not operating to reset the ink levels. If the ink tank is filled as specified above, this product provides an alert and stops operating at the estimated time so that the ink levels do not fall below the lower line on the ink tank.  Store the ink bottles in the same environment as the product. When storing or transporting an ink bottle after removing its seal, do not tilt the bottle and do not subject it to impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking when you transport the bottle. B Unhook the ink tank unit from the product and lay it down. C Open the ink tank unit cover, and then remove the cap of the ink tank. Checking the Ink Levels To confirm the actual ink remaining, visually check the ink levels in the product’s ink tanks. Important: c If the ink level is below the lower line on the ink tank, fill it to the upper line on the ink tank. Continued use of the product when the ink level is below the lower line on the tank could damage the product. [. . . ] If the error does not clear, remove the paper by hand. Make sure the cable is connected, then try again. Open the scanner unit and remove the paper, then turn off the printer. Remove any objects or documents inside ADF. [. . . ]