User manual EPSON EB-G5650 EASYMP MULTI PC PROJECTION

[. . . ] V The antenna for the WirelessHD Transmitter is on the front of the product. If you are close to the antenna, do not look at it for long periods of time. V This product is only for use in the country of sale. [. . . ] Do not use the AC adapter supplied with any other products. V Because the WirelessHD Transmitter performs wireless communication when communicating and when standing by, the external case may become warm. 8 Notes on Usage Restrictions due to the Radio Act The following actions are prohibited under Radio Acts passed in various countries. V Remodeling or disassembling (including the antenna) v Removing the conformance label Restriction of Use v The projector and the WirelessHD Transmitter are manufactured according to the specifications of the country of sale. V When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive etc. ; disaster prevention devices; various safety devices etc; or functional/precision devices etc, you should use this product only after giving consideration to including fail-safes and redundancies into your design to maintain safety and total system reliability. Because this product was not intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care etc, please make your own judgment on this product's suitability after a full evaluation. Requesting Service If you notice anything unusual during operation, or notice any damage, stop using the product immediately and contact the nearest address provided in the projector's User's Guide, or contact your local dealer. 11) for more information on other statuses. (flashing alternately) (flashing alternately) 11 Preparing When installing the WirelessHD Transmitter, note the following. V Place the WirelessHD Transmitter on a wooden shelf or other location that does not block the signal from being transmitted from the front of the product. Note that placing the transmitter on a metal shelf may cause signal instability. V Use the transmitter within the wireless transmission range. For more details on the communication range, see the User's Guide supplied with the projector. V Setup the WirelessHD Transmitter so that the front of the transmitter (where the antenna is located) faces the front of the projector. V Check that the projector and the WirelessHD Transmitter are close to each other, and that there are no other projectors operating in the area. 12 Connecting HDMI A B C D E F Connect an AV device to the WirelessHD Transmitter using the HDMI cable. Connect the WirelessHD Transmitter's AC adapter to an electrical outlet and to the connector on the WirelessHD Transmitter. [. . . ] Connect the WirelessHD Transmitter's AC adapter to an electrical outlet and to the connector on the WirelessHD Transmitter. change the projector's image to WirelessHD input. To change the projector's image, press a change input button on the remote control such as the button, or select the AV device you want to display from the list of connected devices under HDMI Link. [. . . ]