User manual EPSON EH-TW550 QUICK REFERENCE GUIDE

[. . . ] 2 Easily Superimposing Two Images Projected commander image Projected receiver image This device comes equipped with a function that allows you to See "Projecting Images" on page 14 for more information on superimposing images. english Silver screen (commercially available) easily superimpose two images. Commander Receiver Projecting Realistic 3D Images Project stunning 3D content from media such as 3D Blu-ray discs or 3D games. 3D Glasses (supplied) (optional: ELPGS02A/ELPGS02B) in L - out - R 3D compatible device HDMI cable (commercially available) HDMI splitter that supports 3D (commercially available) HDMI cables (commercially available) 3 Checking the Accessories Projector and stacker mount (commander) AA manganese batteries (for remote control) Remote control USB cable approx. [. . . ] You can then use these marks (on the left and right) when reassembling. Remove the protective film from the polarizers. There are screw holes numbered 1 to 4 on the left and right of the stacker mount. You can change the commander's projection angle by changing the position secured by the screw. See "Screen Size and Projection Distance" on page 18 to determine which screw hole to use. Place the screws into the holes, and then tighten them. (on the left and right) Remove the clear protective film from the polarizers. 9 English Connecting Equipment First, connect the power cables and the USB cable. Connecting the commander and the receiver You need to connect a USB cable to link the commander and the receiver. A Plug in the power cables for the commander and the receiver. B Connect the commander and the receiver with the USB cable. Surrounding the receiver's frame with the commander's frame Adjust the commander's frame (white) so that it is outside the receiver's frame (green). C • Pressing buttons on the control panel operates the commander and the receiver. perform projector operations from the commander's control panel. € The following icon is displayed when turning on. The projector indicated by the arrow is the subject of the displayed message. Display the screen to adjust the superimposed images. Five seconds Open the A/V mute slides on the commander and the receiver. Press the [ ] button on the commander's control panel. Commander Receiver Hold down the [Screen Fit]button for about five seconds. E Adjust the focus for the commander and the receiver. F Adjust the projection size for the receiver. [. . . ] Select Display the test pattern, and then press the [ ] button. Select the projector you want to adjust, and then press the [ ] button. Correcting using H/V-Keystone Correct keystone distortion for the receiver's frame (green). Correcting using Quick Corner Correct the four corners of the receiver's frame (green) individually. [. . . ]