User manual EPSON ELP3000

[. . . ] No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shah be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] If vertical lines appear within an image, adjust Tracking to spread the distance between the lines until they disappear Adjusts the strength of the red level. Adjusts the strength of the green level. Compresses the projected image to fit into the projector's 640-pixel image area. Normally you need to compress an image only if your DOS software program has a text screen wider than the projector's area. Configures the projector for the Macintosh LC model. Turn on this setting if you have a Macintosh LC. Red Green Blue Text (PC only) Mac LC (Mac only) Menu Settings 35 Video menu Brightness Lightens or darkens the overall image. Increase brightness to lighten an image; decrease it to darken an image. Adjusts the degree of difference between light and dark areas. Increase the contrast if you want light areas to be very light and dark areas to be very dark Decrease contrast to minimize the difference between the lightest and darkest parts of the image. Emphasizes or de-emphasizes edges within an image. Increase sharpness for more edge definition and a sharper image. Increase color when you want darker and more opaque colors. Decrease color for lighter and less opaque colors. Specifies the type of video signal the projector can receive. Mode can be Auto (default), NTSC, PAL, or SECAM. Contrast Sharpness Color Mode 36 3 Using the Menus l When Auto is selected, the projector automatically identifies the incoming video signal. If you select NTSC, PAL, or SECAM, the projector accepts only the selected video signal. Normally you should not change the default setting. Tint Adjusts the red/green color balance. Increase tint to make the image more green; decrease to make it more red. Display menu Horizontal Moves the image left or right. To move the image to the right, increase the setting; to move it to the left, decrease the setting. Moves the image up or down, To move the image up, increase the setting; to move it down, decrease the setting. Switches the position of the menu between the top and bottom of the projector screen. Vertical Menu Menu Settings 37 Blank To Selects the color shown on the screen when you use the Blank setting to clear the screen. For a description of Blank, see page 41. [. . . ] A type of color scheme that defines color as percentages of red, green, and blue. A standard type of serial communication. S-Video. A type of video signal used in S-VHS videotape formats. It transmits luminance and color separately Saturation. [. . . ]