User manual EPSON EMP-50

[. . . ] Checking Accessories When unpacking the projector and accessories from their box, check that the following items are included. If any items are missing, contact your vendor or an Epson Service Center. · Projector main unit · Lens cover with cord · Remote control · Two remote control batteries (AA manganese, R6) · Power cord · Computer cable · A/V cable (red/white/yellow) · USB mouse cable · PS/2 mouse cable · Instruction Manual (this manual) PS/2 · Soft case Some references to "the unit" or "the projector" in this Manual also refer to accessories supplied with the projector or components sold separately from the projector itself. In This Manual Getting Started Safety precautions and component names and functions Setup Special notes on setup, setup instructions, and screen size and projection distance details Projecting Images Connecting with different devices and projecting and adjusting images What You Can Do Functions to get the most out of your projector Menu Functions (Remote Control Only) Basic menu functions and settings Troubleshooting Troubleshooting projection failure, bad projection, and other problems Maintenance Performing lamp replacement and other routine maintenance and care General Notes Optional parts, shipping instructions, glossary, index, specifications and international warranty 1 Contents In This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To reset all menus to factory shipping values, use the Reset All menu. Tone Audio Input Reset 49 5. 4 Effect Menu Displaying Menus Press the Menu button, use the Enter button to select "Effect" from the top menu displayed, and press the Enter button to move to a submenu. Settings Menu Cursor/Stamp Content Make detailed settings for the cursor/stamp function assigned to the remote control Effect1 button. Shape : Select the shape of the cursor/stamp. Zoom Rate : Select the display zoom factor for the cursor/stamp. Make detailed settings for the horizontal bar function assigned to the remote control Effect2 button. Color : Select the horizontal bar color. Width : Select the width of the horizontal bar from 2-20 dots (in 2-dot steps). L : Low M : Medium H : High Returns Effect menu settings to their factory shipping values. * See page 56 for factory shipping values. To reset all menus to factory shipping values, use the Reset All menu. Horizontal Bar Cursor Speed Reset 50 5. 5 Setting Menu Displaying Menus Press the Menu button, use the Enter button to select "Setting" from the top menu displayed, and press the Enter button to move to a submenu. Settings Menu Keystone Content If the screen is distorted in trapezoidal form, adjust it to normal display. -: Broadens upper screen Normal screen +: Broadens lower screen * · You can also adjust the screen with the Keystone button on the projector. · A keystone correction reduces screen size. · The keystone correction is stored in memory. You will need to readjust the image if the projection angle is changed. · If a keystone correction makes the image noticeably uneven, reduce the video sharpness with the menu commands Video > Sharpness. No-signal/Msg Set the screen display when there is no video signal. (Screen displays black. ) Black : "No-signal" is displayed on a black background (when the language is English). Blue : "No-signal" is displayed on a blue background (when the language is English). Set whether the input source currently selected is displayed/not displayed on the screen. ON : After input source switching, the input source is displayed for approximately 3 seconds. Prompt OFF : The input source is not displayed. 51 Menu A/V Mute* (See page 74) Content Temporarily eliminates video during a presentation in order to focus attention on the presenter or elsewhere. Press the A/V Mute button to use this function. After sleep mode is activated, the projector enters standby mode when no signal is input from an external source for a continuous period of 30 minutes. ON : Sleep Mode active OFF : Sleep Mode inactive Returns Setting menu settings to their factory shipping values. * See page 56 for factory shipping values. [. . . ] 327 Fax: 02-2713-2155 http://www. epson. com. tw THAILAND : EPSON (Thailand) Co. , Ltd. 24th Floor, Empire Tower, 195 South Sathorn Road, Yannawa, Sathorn, Bangkok 10120, Thailand. 309, 316, 317 Fax: 6700688 http://www. epson. co. th Epson Technical Center 21st Floor, Payathai Tower, 128/227 Payathai Road, Rachataewee, Bangkok 10400, Thailand. Tel: 6120291~3 Fax: 2165005 http://www. epson-tech. in. th 82 DECLARATION of CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer Address : SEIKO EPSON CORPORATION : 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan : EPSON EUROPE B. [. . . ]