User manual EPSON EMP-8100

[. . . ] Before use Installation Connections Projection Useful Functions Adjustments and setting Using the projector software Troubleshooting Maintenance Others Accessory Verification Check to confirm that the following items are included in the package when removing the projector and accessories from the box. Contact your dealer if any items are found to be missing. · Projector Lens Cover with string · Remote Control · 2AA Batteries for the remote control (three-cell alkaline manganese batteries) · Power Cord · Computer Cable · Computer Cable (mini D-Sub 15-pin/5BNC) · Audio Cable · RCA Audio Cable (Yellow) · RCA Audio Cable (Red/White) · Main Cable · USB Mouse Cable · PS/2 Mouse Cable PS/2 MOUSE · Serial Mouse Cable SERIAL MOUSE · Mac Mouse Cable MAC MOUSE · Mac Serial Cable MAC SERIAL · PC Serial Cable PC SERIAL · Projector Software CD-ROM S E RI AL MO US E · Owner's Manual (this document) Features G Crystal clear screen Clarity has been vastly improved. Provides crystal clear projections even in bright areas, perfect for presentation purposes. G Wide range of display resolution Uses a newly-developed high resolution liquid crystal panel. (1024×768) G Compact and light A compact body makes it easy for carrying around. [. . . ] · The P in P function is executed by pressing the [PinP] button. (see page 59) The status for [No Image Signal Input] and other message display. · The user logo must be registered and set up before it can be amended. Sets whether to display the input source on the screen or not. Sets up the screen status for when the [A/V Mute] button is pressed. · User logos must be registered and set up before they can be amended. Sets the mode for the input image signals connected to the BNC port. YCbCr: Enables video signals to be input (YCbCr or YPbPr. ) Default Value Individual settings between types 1 to 3 Cursor Speed Reset M - Setting Keystone Center value P in P Composite No Signal Msg Blue Prompt A/V Mute ON Black BNC RGB Menu Operations - 67 Top Menu Setting Sub Menu DPMS Function Sets the energy-saving function for when no image signals are being input. When this is set at [ON], projection will be automatically ended and the projector will enter the sleep mode if no image signals are input and no operations are performed for a period of thirty minutes (the operation indicator will be illuminated in orange). Press the [Power] button to restart projection. Returns all setting menu adjustment values to the default values. Press the [Enter] button and then select [Yes] on the confirmation screen displayed. · Select [Reset All] to return all image and sound values to the default settings. (see page 70) Press the [Enter] button and follow the instructions displayed on the confirmation screen. · The saving procedure requires a certain amount of time to complete. Do not attempt to operate the projector or the equipment connected to the projector while this procedure is running. Failure to observe this may result in damage. · The size that can be registered is 400 x 300 dots. · The display size will be adjusted when video images are being projected. Sets the language with which messages are to be displayed. Press the [Enter] button and select the required language from the language selection menu displayed. Displays the user logo during warm-up after the power has been switched on. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. [. . . ]