User manual EPSON EMP-8150

[. . . ] Before use Installation Connections Projection Useful Functions Adjustments and Setting Using the EasyMP. net Software Troubleshooting Maintenance Others Accessory Verification Check to confirm that the following items are included in the package when removing the projector and accessories from the box. Contact your dealer if any items are found to be missing. · Projector Lens Cover with string · Remote Control · 2AA Batteries for the remote control (three-cell alkaline manganese batteries) The NL model is not fitted with a lens or lens cover. · Power Cord · Computer Cable · Computer Cable (mini D-Sub 15-pin/5BNC) · Audio Cable · RCA Audio Cable (Yellow) · RCA Audio Cable (Red/White) · Main Cable · USB Mouse Cable · PS/2 Mouse Cable PS/2 MOUSE · Serial Mouse Cable SERIAL MOUSE · Mac Mouse Cable MAC MOUSE · Mac Serial Cable MAC SERIAL · PC Serial Cable PC SERIAL · EasyMP. net Software CD-ROM S E RI AL MO US E · Owner's Manual (this document) · 16MB Compact Flash Card+Card Adapter · EasyMP. net User's Guide · Warranty Card I Features G Crystal clear screen Clarity has been vastly improved. Provides crystal clear projections even in bright areas, perfect for presentation purposes. G Wide range of display resolution Uses a newly-developed high resolution liquid crystal panel. [. . . ] Press the [Enter] button and select the required language from the language selection menu displayed. · The EasyMP. net screen is displayed in three interface languages only English, German and French. Even if another interface language is selected, the display language will not change. Displays the user logo during warm-up after the power has been switched on. · The user logo must be registered and set up before it can be amended. Adjusts the color temperature* of the image. Auto: Automatically adjusts the color settings. Manual: Press the [Enter] button and select the required item from the color setting menu displayed. · Set the color temperature value to the yardstick value. · The black level and white level settings are only used when multiple projectors are used in the stack formation. Default Value ON Reset - Capture Image capture - User's Logo Capture EPSON logo Advanced Language English Startup Screen OFF Color Setting Auto Menu Operations - 71 Top Menu Advanced Sub Menu Comp2 Sync Termination Function Sets the Computer #2 termination mode to enable image processing from a Port. On: Terminated in analog (75) OFF: TTL input · Usually used at [OFF]. Set at on with the switcher when analog 75 termination is required. Set at [ON] to project images onto a half-transparent screen from the rear. Set at [ON] to project images when suspended from the ceiling. The projected image can be be inverted from left to right and up and down. · The optional ceiling suspension unit is required to suspend the projector from the ceiling. Returns all advanced setting menu adjustment values to the default values. Press the [Enter] button and then select [Yes] on the confirmation screen displayed. · Select [Reset All] to return all image and sound values to the default settings. (Displays the current settings) Default Value OFF Rear Proj. Ceiling OFF OFF Reset - About Reset All Execute - Returns all items in the set-up menus to the default values. Press the [Enter] button and then select [Yes] on the confirmation screen displayed. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. [. . . ]