User manual EPSON EMP-9000NL

[. . . ] Please read the following important information about your projector. Warning: Never look into the projector lens when the lamp is switched on as the bright light can damage your eyes. Never let children look into the lens when it is on. Warning: Never open any covers on the projector except the lamp and filter covers. [. . . ] When you press the left of the button, it reduces the image. To display a portion of the enlarged image which is outside of the display area, press the Pointer button to scroll the image. Use to display special effects that have been assigned in the Effect menu or with the optional ELP Link IV software. Use the Enter button to navigate the menus or use the remote as a mouse pointer when the projector is connected to the computer with the main cable and the mouse cable. You can also selects a menu option by pressing the center of this button(Enter). If you press the Enter when a menu or help is displayed, you can access to the next menu layer. When the image source is a computer, the Enter button acts as the mouse left click. If you press the Esc button when a menu or help is displayed, you can go back to the previous menu layer. To set the subscreen being displayed, press in the following order : [Menu] [Setting] [P in P]. The default settings are as follows; Subscreen size : 1/9 division Main screen input source: Computer Subscreen input source : Video To change the subscreen position, press the Pointer button. the subscreen will move to the selected direction. The current settings for the computer input signal are saved and recalled for the next use. User can save the preset up to five settings. The following settings are saved: Resolution, Tracking, Sync Signal, Position. You can use the operation panel to control the projector instead of the remote control. However, you can program and access the custom features only using the remote control. If you press the Esc button when a menu or help is displayed, you can go back to the previous menu layer. Pressing the button once switches to the Computer1, and pressing twice switches to the Computer2/BNC. Pressing the button once switches to the composite Video, and pressing twice switches to the S-Video. Use these buttons to adjust an overall image that is fuzzy or streaked, or to select menu items during menu operations. match the projectos's internal clock to various computer graphic signals (tracking adjustment). Use these buttons to adjust an image with vertical fuzzy lines, or to change numeric settings during menu operations. [. . . ] If you're displaying a computer image, adjust the red, green, and blue settings in the Video menu. First check that the volume setting is not turned all the way down and that the RCA audio cable is securely attached to both the projector and the audio source. Press either the Computer or Video button on the remote control or operation panel to select the proper source. Image size Projection distance Remote control range Internal speaker system Optical aspect ratio Zoom ratio Note: The frequencies of some computers may not allow the image to be display correctly. [. . . ]