User manual EPSON EMP-TWD3

[. . . ] Unpacking the projector Refer to the following checklist and make sure you have received all of the items. Contact the place of purchase if items are missing. YMain Unit YRemote Control Y AA type dry cell batteries (2 pcs. ) YPower cable (3m) YComponent video cable YUser's Guide YDocument CD-ROM *Some regions may not have the Document CD-ROM included as an accessory. YLens cover Notations used in this guide Indicates content which may cause projector damage or malfunction. Indicates additional information and points which may be useful to know regarding a topic. s Indicates a page where useful information regarding a topic can be found. Indicates operating methods and the order of operations. [. . . ] · If stopped during random play mode, resume play cannot be used. 31 Changing the audio language When a disc has been recorded with multiple audio signals or languages, you can switch to the available audio signal or language of your preference. 1 Press during playback. The current audio settings are displayed. 2 3 While the audio settings are displayed, press repeatedly and select the desired setting. Press to change the setting. Wait a few seconds, or press . · You can also use the menu bar to change the setting. 34 · If a language code (for example AA) is displayed sp. 51 · The meaning of the characters displayed during playback is as follows. - ST: Stereo - L: Left channel audio - R: Right channel audio 32 Changing the subtitles display You can choose whether or not to display subtitles for discs that have been recorded with subtitles. When a disc has been recorded with multiple language subtitles, you can switch to the available language of your preference. 1 Press during playback. The current subtitle settings are displayed. 2 While the subtitle settings are displayed, press repeatedly and select your language/OFF. Press and select the subtitle language. If you press and subtitles display on/off. repeatedly, you can select the subtitle type Advanced Operations 3 Changing the angle Wait a few seconds, or press . For discs that have been recorded with multiple camera angles, you can switch from the main angle to a different camera angle of your preference, such as from above, or from the right, during playback. 1 Press during playback. The current angle is displayed. 2 3 While the angle is displayed, press select the desired angle. Press to change the setting. repeatedly and Wait a few seconds, or press . 33 Making operations from the menu bar Set to the [Function] position before performing operations 1 Press twice during playback. The following status bar and menu bar is projected. 2 3 Press use. until the pointer reaches the item you wish to Press · Press . once and the menu bar disappears. · When stopped, some functions may not work. · The status bar is not displayed when playing back cinemascope (letterbox) . Although functions can be set in this state, when to return the aspect to return to the former aspect ratio. it is necessary to display the status bar, press ratio to normal. Press Menu bar function list Select the repeat mode. sp. 28, 29 Set a time based start point. sp. During playback, select the chapter number you wish to play using the numeric buttons. With the function/numerics toggle switch in the [123 ] position, enter the number in the following way. Example) 5: 10: 20: If you make a mistake, enter the correct number once again. Press . Select the audio language/type. sp. 32 Select to change the subtitles display. sp. 33 34 Auto-standby, goodnight timer (Sleep timer) settings Set to the [Function] position before performing operations Auto stand-by: When playback has finished or been stopped, or an operation has not been performed for around 3 minutes, the power switches off automatically. Sleep timer: Once the set time has elapsed, the power switches off automatically. You can prevent unneccesary power being consumed if you fall asleep while watching a movie. You cannot use auto stand-by and sleep timer at the same time. Press . , the mode name displayed on the image and · Each time you press desired item is displayed. in the display window changes as follows. Press repeatedly until the Auto stand-by is activated. [. . . ] BHD. 3rd Floor, East Tower, Wisma Consplant 1 No. 2, Jalan SS 16/4, 47500 Subang Jaya, Malaysia. :03 56 288 388 or 56 288 399 77 SINGAPORE : EPSON SINGAPORE PTE. LTD. 1 HarbourFront Place #03-02 HarbourFront Tower One Singapore 098633. Tel: 6586 3111 Fax: 6271 5088 THAILAND: EPSON (Thailand) Co. , Ltd. 24th Floor, Empire Tower, 195 South Sathorn Road, Yannawa, Sathorn, Bangkok 10120, Thailand. [. . . ]