User manual EPSON EPL-5700 GETTING READY GUIDE

[. . . ] Supplement This supplement includes update information for the EPL-5700. Installing the Printer Driver Please change the first sentence of step 6 at page 13 of your Getting Ready!Replace: If you inserted the CD-ROM in drive D, click OK. With: In you inserted the CD-ROM in drive D, type D: \ WIN95 and click OK. lnstalling Screen fonts Follow these steps to install the screen fonts: 1. Make sure Windows is running and the printer is turned off. [. . . ] Place the cover on the paper tray, as shown below. 4. Pull up the paper support on the front of the printer. G G Note: The front of the paper tray can be lowered to accommodate paper longer than A4 size. See "Loading the paper tray" in Chapter 1 of your Reference Guide. You can also use the manual feed slot to load single sheets of paper. To load paper from the manual feed slot, see "Loading paper manually" in Chapter 1 of your Reference Guide. 7 G G To load thick envelopes, heavy paper, or other media such as labels and transparencies, feed sheets one at a time. See "Printing on special paper" in Chapter 1 of your Reference Guide. By default, the printer is set up to print A4-size paper. If you are printing on any other size of paper, you need to change the printer's paper size setting. See "Making Basic Driver Settings" on page 15. 6 Attaching the power cord 1. It is off when the N side of the power switch on the left side of the printer is pushed in. 2. Insert the power cord into the back of the printer. Then plug the other end into a properly grounded electrical outlet. 8 7 Testing the printer To test whether the printer is set up correctly, print a status sheet. The status sheet contains information about the printer, including the current settings. Make sure the protective tapes are removed as described in "Removing the protective tapes" on page 4. Turn on the printer as shown below. 9 3. Press the Alt and the Form Feed buttons on the top right corner of the printer simultaneously. The printer prints a status sheet. Paper Toner Memory Alt Continue Form Feed On Line Reset Status Sheet 8 Connecting the printer to the computer Your printer comes with two standard interface connectors: Parallel and Serial. To use the Parallel interface, see the interface connection instructions below. To use the Serial interface, follow the instructions below and substitute Serial for Parallel where appropriate. Your printer also has a room for an optional interface connector: a Type-B interface connector. See Chapter 3, "Options, " in your Reference Guide for more information on this and other options. Make sure both the printer and the computer are off. 10 2. [. . . ] Double-click the Printers icon. 16 3. Make sure your printer is highlighted, and click the Setup button. Select the paper size you loaded in the printer from Paper. If you don't see your paper size on the list, use the arrow on the right to scroll through the list. [. . . ]