User manual EPSON EPL-5900L SETUP SHEET

[. . . ] If it does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. If it has been dropped or the cabinet has been damaged. If it exhibits a distinct change in performance, indicating a need for service. Ozone safety Ozone emission Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced only when the printer is printing. [. . . ] Be careful when working inside the printer as some components are sharp and may cause injury. 1. Important Safety Instructions Read all of the following instructions before operating your printer: Follow all warnings and instructions marked on the printer. Unplug this printer from the wall outlet before cleaning. Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners. Avoid touching the components inside the printer unless instructed to do so in this guide. Never force printer components into place. Although the printer is designed to be sturdy, rough handling can damage it. Be sure to keep consumables out of the reach of children. Do not leave jammed paper inside of the printer. Do not place the printer on an unstable surface. Do not put your printer where the cord will be stepped on. Avoid using outlets that other appliances are plugged into. w Warning:controls, or the performance of procedures and adjustments other than those The use of specified in this guide may result in hazardous radiation exposure. The maximum power of the laser diode is 5 mW and the wavelength is 770 to 810 nm. Average Radiation Power 27 µW at laser aperture of the print head unit Wavelength 770 to 810nm 2 Finding a Place for the Printer 2. Allow adequate space for easy operation and maintenance. This is a Class III b Laser Diode Assembly that has an invisible laser beam. The printer head unit is NOT A SERVICE ITEM, Therefore, the printer head unit should not be opened under any circumstances. An additional laser warning label is affixed to the inside of the printer. 15. 0 cm 10. 0 cm 60. 0 cm Laser Source 15. 0 cm 55. 0 cm Slots and openings in the cabinet and the back or bottom are provided for ventilation. Do not put the printer on a bed, sofa, rug, or other similar surface or in a built-in installation unless proper ventilation is provided. Use the type of power source indicated on the label. If you are not sure of the type of power available, consult your dealer or local power company. If you are unable to insert the plug into the outlet, contact a qualified electrician. If you use an extension cord, make sure that the total of the ampere ratings on the products plugged into the extension cord does not exceed the extension cord ampere rating. 10. 0 cm 70. 6 cm Place the printer where you can easily unplug the power cord. Keep the entire computer and printer system away from potential sources of interference, such as loudspeakers or the base units of cordless telephones. [. . . ] Then double-click the folder of your language, and double-click the OS name you're using. And double-click the Setup folder, then click Setup. exe. About an Additional Driver When the printer is shared with some computers (clients) in a network and the print server's OS is Windows NT 4. 0 or Windows 2000, you can install the printer driver for the client's OS in the server as an additional driver. This allows the clients to download the appropriate printer driver from the printer server if necessary. [. . . ]