User manual EPSON EPSONNET 802.11G

[. . . ] Introduction About Your Network Interface The EpsonNet 802. 11g Wireless Ext. Print Server is a wireless network interface that connects to the USB port of an Epson device (such as printer or all-in-one). With this network interface, you can create a wireless connection between the Epson device and a local area network using the IEEE 802. 11b/g communication standard. A radio signal is transmitted over the wireless network when you send a job to the device. [. . . ] Displays the network interface information. Displays information about Wireless Displays information about NetWare. Displays information about Microsoft Network. Displays information about Network Scan. AppleTalk MS Network IPP SNMP Time Network Scan Configuration - Optional 156 Administrator Type the name of the administrator and a link to a favorite Web site. Resets the device and returns to the default settings. Set the password to protect settings. Reset Password Information General information Items Administrator Name Location Interface Card Model Name MAC Address Explanations Administrator name of the device Location of the device Model of the network interface Unique hardware address of the network interface. You can distinguish the network interface by its MAC address. Hardware version of the network interface Software version of the network interface Product name of the device attached to the network interface A wireless LAN mode: Infrastructure or Ad Hoc SSID (or ESSID) of the access point or wireless LAN Channel used on the network interface for the Ad Hoc mode Transmission speed Hardware Version Software Version Model Name Communication Mode SSID Channel Transmission Rate 157 Access Point (MAC Address) Signal Condition Access point used for wireless LAN in the Infrastructure mode Condition of the radio wave, as follows: Three antennas: Excellent Two antennas: Good One antenna: Poor None: No connection The background color of the text box indicates the device's status. Green indicates that the device is idle or printing. Yellow indicates that either the paper or toner is low. Red indicates that either the paper or toner is completely out, the device is offline, there is a paper jam, the cover is open, or an error has occurred. The device status is not updated automatically. Press Refresh to display the latest device information. Printer Status Current Time Refresh button Configuration - Network Screens Wireless Wireless Basic Settings Items Communication Mode Explanations Select a wireless LAN mode: Infrastructure or Ad Hoc. Select the operation mode from the list. Enter the SSID (or ESSID) of the access point or wireless LAN (up to 32 characters). When the mode is Ad Hoc, select the channel used on the network interface. Operation Mode SSID Channel 158 Transmission Rate Select the transmission speed from the list. Security Settings Items Security Level Explanations Select the security level from the list. Note: If you are using EpsonNet 802. 11g Wireless Ext. Print Server in the Ad Hoc mode, you cannot use WPA-Personal (TKIP) for the security level. WEP Authentication Method Select an authentication algorithm: Open System, Shared Key, or Auto. (This item is not available when WPA-Persona (TKIP) is selected for the security level. ) WEP Settings Items Input using hex Explanations Enables or disables the function to set the WEP Key in hexadecimal. When you select 64 bit(40 bit) for the length, you can set up to 4 WEP Keys. When you select 128 bit(104bit), you can set only one WEP Key. For 64bit and ASCII, enter 5 characters. [. . . ] Note: The models available on the market after 2004 are excluded. 282 Specifications Wireless Network Interfaces Specification Standard: Communication Speed: IEEE 802. 11b/g 11, 5. 5, 2, and 1 Mbps (802. 11b) 54, 48, 36, 24, 18, 12, 9, and 6 Mbps (802. 11g) Security: Frequency Band: Wireless Medium: 64-bit or 128-bit WEP Data Encryption WPA-PSK(TKIP) 2. 4 GHz 2. 4000 - 2. 4835 GHz (802. 11b/g) Direct Sequence Spread Spectrum (DS-SS) Orthogonal Frequency Division Multiplexing (OFDM) Operation Channels: Communication Mode: Roaming Function: Antenna Type: Printer Interface: Host Interface: Dimensions: US, Canada: 1 - 11 Europe: 1 - 13 Ad hoc mode Infrastructure mode Supported Built-in diversity antenna USB 1. 1 Downstream port/Type A USB 1. 1 Upstream port/Type B Width: 43 mm (approx. 5. 8 in. ) 283 Weight: Operation Range Indoor (802. 11g): Indoor (802. 11b): Outdoor (802. 11g): Outdoor (802. 11b): Approx. 198 yd) at 11 Mbps Electrical Specifications Rated Voltage: Rated Current: DC 5 V±5% 2. 0 A Current Consumption: 500 mA Regulatory Approvals Wireless Standard: EMC: FCC part 15 Subpart C RSS210 FCC part 15 subpart B Class B CAN/CSA-CEI/IEC CISPR 22 284 Reliability MTBF: 10, 000 hours (power on, 100% duty) Environmental Operating Temperature: Storage Temperature: Operating Humidity: Storage Humidity: Operating Vibration: Storage Vibration: Operating Shock: Storage Shock: 0 to 50° C (32 to 122° F) -30 to 60° C (-22 to 140° F) 10 to 85% RH 0 to 85% RH 1 G (5 to 55 Hz) 1. 5 G (5 to 55 Hz) 1G 2G Network Software NetWare 3. x, 4. x, 5. x, or 6 EtherTalk (AppleTalk) TCP/IP NetBEUI 285 Regulatory Approvals for AC Adapter (A261H) Input: Output: Power Consumption: Safety Standards: EMC: AC 100 - 240 V, 50 - 60 Hz DC 5 V±5%, 2. 0 A Max. 0. 31 A UL 1310/1950 CSA C22. 2 No. 223/No. 950 FCC part 15 subpart B Class B CSA C108. 8 Class B FCC Compliance Statement for United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]