User manual EPSON ES-1200C

[. . . ] EPSON ® Scanner User's Guide CAUTION: Before connecting the scanner to a power source, release the transportation Screw as shown in the figures below. Bevor Sie den Scanner ans Netz anschlieBen, l&en Sie bitte die Transport-Sicherungsschraube wie in den folgenden Abbildungen dargestellt. Avant de connecter le scanner au secteur, retlrez la vis de blocage pour le transport comme indique ci-dessous. Antes de conectar el scanner a la toma de corriente, afloje el tomillo de protection para el transporte tal coma puede ver en la ilustracion siguiente. [. . . ] There is a problem, such as an open cover, with the optional transparency unit or the optional automatic document feeder. Check that the transportation screw is released and check any options installed; then push the RESET button. If the scanner still does not operate properly, try turning the scanner off and then back on. If the scanner still does not operate properly, or if this error occurs repeatedly, consult your dealer. Option error This indicates a problem such as a paper jam with an installed option unit. Check the option unit and correct the cause of the trouble. Troubleshooting 3-3 The OPERATE light does not come on. Make sure the power cable is correctly plugged into the scanner and the power outlet. The READY light does not come on. Make sure the scanner is correctly connected to the computer and that the computer is turned on. The scanner does not start scanning. See that the scanner's READY light is on. Make sure that you have selected the correct interface port and settings with your software. Also make sure the interface board on your computer is properly installed. If you are connecting the scanner with the SCSI interface, see that the terminator and SCSI ID are correctly set up. If you have other expansion boards in your computer, see that they are not interfering with the interrupt setting of the interface board for your scanner. (See your computer manual. ) 3-4 Troubleshooting The scanner software does not work properly. Be sure you have correctly installed your software. Check that the system requirements, such as the operating system version, are correct for using your software. See if the computer has enough memory for your software. If you are running other software at the same time, using RAM resident programs, or have many device drivers, the computer may not have enough memory remaining. (gee your software and computer manuals. ) Make sure that your software supports this model of scanner and that you correctly installed or set up the software. (gee your software manuals. ) The entire image is distorted or blurred. Make sure that the document is placed flat against the document table (the glass area). You may have accidentally moved the document during scanning. [. . . ] dithering A process in which software or an output device simulates continuous tones with groups of dots. document The physical item, such as a sheet of paper or a book, that you place on the document table for the scanner to read. Short for dots per inch. The higher the value, the higher the resolution. dropout color A color you set the scanner not to recognize. GL-2 Glossary ESC/I Abbreviation for EPSON Standard Code for Image scanners. A system of commands to control image scanners with software. ESC/P Abbreviation for EPSON Standard Code for Printers. [. . . ]