User manual EPSON EXPRESSION HOME XP-406

[. . . ] Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product. SEIKO EPSON CORPORATION and its affiliates shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. EPSON is a registered trademark of SEIKO EPSON CORPORATION. IBM and PS/2 are registered trademarks of International Business Machines Corporation. [. . . ] PageManager for EPSON from the scanner software CD-ROM) Note: If you are using your scanner over a network, you cannot use the scanner's Start button in the ways described above. a If you are using Windows Millennium Edition, 98, or 2000, read "Making Windows Millennium Edition, 98, and 2000 Settings" on page 3-2 first. If you are using Windows 95 or NT 4. 0, or a Macintosh computer, read "Making PageManager Settings" on page 3-4. Setting Up the Start Button 3-1 Making Windows Millennium Edition, 98, and 2000 Settings This section explains how to make settings that control which application opens when you press the scanner's Start button. You can specify one application to open automatically when you press the Start button, or you can have a window open allowing you to choose from a list of applications. Follow the steps below to make these settings. a a Note: These settings do not apply to Windows 95 or NT 4. 0, or to Macintosh computers. Click Start, point to Settings, and select Control Panel. Double-click the Scanners and Cameras icon. The Scanners and Cameras Properties dialog box appears. 3-2 Setting Up the Start Button 3. Select your scanner from the list of installed scanners and cameras, click the Properties button, then click the Events tab. 4. In the Scanner events list, make sure Start Button is selected. To have an application open automatically when you press the Start button, select the check box next to that application in the Send to this application window, and clear the check boxes of all the other applications. a To have your document scanned and sent to an application Start button, select Presto!with one press of the PageManager for EPSON, complete the steps in this section, then proceed to "Making PageManager Settings" on page 3-4. a If you want to choose from a list of applications when you press the Start button, select the check boxes of the applications you want. a Setting Up the Start Button 3-3 Note: t Depending on the application, EPSON TWAIN Pro may also Start button. Make sure the scanner is turned off, and unplug the power cord. Remove the document cover from the scanner by lifting it straight up on its back edge. Slide the mounting slots on the Transparency Unit under the two installation screws attached to the scanner. Options 4-3 4. Insert the two installation screws provided with the Transparency Unit into the holes as shown below, and then tighten the screws with a coin. 5. Connect the Transparency Unit's connector to the option connector on the scanner. 4-4 Options Preparing transparencies for scanning Four film holders for scanning various types of transparencies are included with this unit. For instructions on loading your transparencies into the film holders and positioning them on the scanner, go to the section listed below that matches the type of transparency you want to load. Note: Be sure to wipe the Transparency Unit glass, the scanner's document table, and the narrow window near the mounting bracket with a soft cloth before scanning transparencies. For instructions on scanning normal paper documents, see "Scanning normal reflective documents" on page 4-16. 35-mm film strips Mounted slides 120/220 film 4 × 5 inch film Non-standard film sizes page 4-6 page 4-8 page 4-10 page 4-12 page 4-15 Options 4-5 35-mm film strips 1. Place the 35-mm film strip holder on a flat surface, and remove a strip cover. 2. Insert a strip of film in the film strip holder, making sure the glossy (smooth) side of the film is facing down. 4-6 Options 3. Replace the strip cover that you removed in step 1. [. . . ] These are the colors of the color system used by monitors and scanners. bi-level data Image data that is composed of 1 bit per pixel. A pixel is represented by a single bit of digital data that can be expressed as only 1 (light) or 0 (dark). bit Short for binary digit. The smallest unit of data in computer processing. A bit can represent one of two values: on, represented by a 1, or off, represented by a 0. pixel depth The pixel depth refers to the number of bits in each pixel. [. . . ]