User manual EPSON PHOTOPC P-1000

[. . . ] ® User's Guide 1 English All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other products. [. . . ] Information about the image and battery status icon are hidden when OFF. Return to Main Menu Close the pop up menu and return to the Main Menu. Decrease Number of Copies Decrease the number of copies by one sheet. This setting is valid until printing is executed. PC/DSC View Mode Change the view mode of the card folder. When PC mode is selected, all images and folders are displayed in the current folder. When DSC mode is selected, only the images in the correct folder are displayed. Note: You cannot change the view mode of the album folder from the PC mode. The default setting of the card folder is set to the DSC mode. Increase Number of Copies for All Increase the number of copies by one sheet for all images displayed. This command is available in the Select Photos screen. This setting is valid until printing is executed. Note: You can increase the number of copies up to 99. Reset Number of Copies for All Reset the number of copies to 0 for all images displayed. This command is available in the Select Photos screen. Show/Hide Unsupported Files Change whether or not to display unsupported files. 38 Viewing and Managing Images Change Album Name Change the selected album's name. You can select the name from the displayed list. When you select a name which already exists, the new album is given a number after its name. 3 3 3 3 3 3 3 3 3 3 Viewing and Managing Images Set as the Album Thumbnail Set the selected image as an album or card folder's icon. Select to Copy/Undo Copy Command Reserve or cancel copying of the selected image. Note: Copy reservations that have been made are cleared when switching the folder to display. Select to Delete/Undo Delete Reservation Command Reserve or cancel deleting of the selected image or folder. Note: Delete reservations that have been set are cleared when switching the folder to display. 39 English Chapter 4 Direct Printing Before Printing You can print an image by connecting PhotoPC P-1000 directly to a printer. This section describes how to print the images on the PhotoPC P-1000. Available types of paper PhotoPC P-1000 supports the following sizes and types of paper. Paper Premium Glossy Photo Paper Premium Semigloss Photo Paper Size 4 × 6 in. *, 10 × 15 cm, 5 × 7 in. , Letter*, A4 Supported printers PhotoPC P-1000 supports printers listed below. PhotoPC P-1000 comes with two USB cables. Choose either of the cables depending on your printer. Printer model Stylus Photo 810, Stylus Photo 820, Stylus Photo 830, Stylus Photo 830U, Stylus Photo 900, Stylus Photo 950, Stylus Photo 960, Stylus Photo 2100, Stylus Photo 2200 Stylus Photo 935 Cable * Stylus Photo 935 is not supported. Note: For details about paper, see your printer's manuals. 40 Direct Printing Connecting PhotoPC P-1000 to a printer The following procedure shows how to connect the PhotoPC P-1000 to the Stylus Photo 960. For other printers, refer to your printer's manual. Make sure that PhotoPC P-1000 and the printer are turned off. Remove the connector cover and connect the USB cable. 3. Connect the other end of the USB cable to the connector on the printer. 4 4 4 4 4 4 4 4 4 4 2. Note: See your printer's manual for the location of the cable connector on your printer. Selecting the appropriate printer driver Note: Keep the connector cover in a safe place. Use the appropriate cable for your printer. See "Supported printers" on page 40 for details. [. . . ] Press Cancel to return to the previous screen. Head Cleaning Execute the head cleaning on the printer that is currently connected. After head cleaning, you can check the condition of the print head by printing the nozzle check pattern. Nozzle Check Print the nozzle check pattern. You can check the condition of the print head. When the nozzle check pattern is not printed clearly, execute head cleaning. Maintenance and Troubleshooting 71 English Resetting PhotoPC P-1000 This section describes how to reset PhotoPC P-1000 when a error occurs and operations cannot be done. [. . . ]