User manual EPSON POWERLITE 1815P

[. . . ] PowerLite 1815p Multimedia Projector ® User's Guide Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. [. . . ] You see your image files when the folder opens. Position the cursor on the image file you want to project and press Enter. 10. If you want, you can press a side of the pointer button to rotate the image while you're viewing it. To stop viewing images, select Exit at the top of the screen and press Enter. Creating a Slideshow on the Fly If you have a folder containing an assortment of images, you can display them as a slideshow. See page 118 for a list of the supported file formats. Displaying the Slideshow First make sure the images are stored in a folder on the USB drive or CompactFlash memory card. Connect your external drive (see page 50) or insert your CompactFlash memory card (see page 51). If you are using an external hard drive, plug in its power cord. Turn on the projector, if it is not already on. Select EasyMP as the source by pressing the EasyMP button on the remote control. If you have more than one card inserted in a multicard reader, use the pointer button on the remote control to select the card you want to use and press Enter. 102 Presenting from a USB Drive, Camera, or CompactFlash Card You see your files displayed on the screen: 4. Use the pointer button on the remote control to highlight the folder containing your images and press Enter. From the pop-up menu, use the pointer to select Play Slideshow and press Enter. (Or highlight the Slideshow button at the bottom of the screen and press Enter. ) The images contained in the folder are presented as a slideshow. Use the remote control to run the slideshow as described in the next section. Controlling Your Slideshow While your slideshow is running, use the remote control as follows: Press Enter or Page down to display the next slide or image, or to begin playing a movie. Press Page up to display the previous slide or image, or to replay a movie. Press the appropriate side of the slide or image on the screen. pointer button to rotate a To exit the slideshow at any point, press the Esc button. Select Exit and press the Enter button. Presenting from a USB Drive, Camera, or CompactFlash Card 103 Changing Timing and Other Settings For each folder on the USB drive or memory card, you can set the display timing for your slides and change several other display settings. Select the folder containing the images for the slideshow settings you want to change and press Enter. note You can also display the Option screen by selecting Option at the bottom of the PC Free screen and pressing Enter. 2. From the drop-down menu, use the pointer to select Option and press Enter. Use the pointer button to select from the following settings. After making a selection, press Enter to save the change. Mode switching Lets you choose the mode to use when presenting slideshows, movies, or images, or editing a scenario on the projector. [. . . ] Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company. If you use the projector in a country other than where you purchased it, use the correct power cord for that country. Do not overload wall outlets, extension cords, or power strips. [. . . ]