User manual EPSON POWERLITE 5600P

[. . . ] EPSON PowerLite 5600p and 7600p ® ® Multimedia Projectors User's Guide Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. [. . . ] Press the Menu button to display the Main menu. Use the down arrow (control panel) or Enter button (remote control) to move down to the Preset option and press Enter. You see the Preset Selection menu with the current resolution setting displayed. Fine-tuning the Projector 47 4. Use the down arrow (control panel) or Enter button (remote control) to select the number to which you want to assign the current settings. When you see the "Overwrite?" prompt, select Yes and press Enter. When you want to use a saved setting, press the Preset button on the remote control. You see the setting number displayed in yellow at the top right of the screen. To select another number, press the Preset button again until the setting number you want is displayed. The projector resets itself according to the selected setting. Adjusting the Sound You can use the Audio menu to adjust the sound volume or treble/bass balance. Press the down arrow (control panel) or press down on the Enter button (remote control) to highlight Audio. You see the following: Video Audio Effect Setting User's Logo Advanced About Reset All Volume Treble Bass Reset : : : 0 0 0 Execute :Select :Enter 3. Press Enter to select the Audio menu. 48 Fine-tuning the Projector 4. Use the arrow buttons (control panel) or the Enter button (remote control) to set the following options: I I I Volume Treble Bass 5. When you're finished adjusting the sound, press Esc or Menu. Customizing the Highlighting Tools The highlighting tools let you add pointers and other types of annotations to your image, as described on pages 37 to 39. You can use the Effect menu to customize these tools and set the cursor speed for highlighting. The Reset option lets you return all the highlighting tools to their default settings. Use the down arrow button (control panel) or the Enter button (remote control) to highlight Effect. You see the Effect menu: Video Audio Effect Setting User's Logo Advanced About Reset All 1 Cursor/Stamp 2 Box 3 Spotlight 4 Bar Cursor Speed Reset Setting Setting Setting Setting L MH Execute : :Select :Enter 3. Press Enter to select the Effect menu. Fine-tuning the Projector 49 4. Use the arrow buttons (control panel) or the Enter button to customize: I Cursor/Stamp Lets you define the shape and size for three different pointers. For some pointers, you can also define the color and length. I Box Lets you define the box color and choose from a solid or outline box, with rounded or square corners. I Spotlight Lets you choose a large, medium, or small spotlight. I Bar Lets you define three different bars. For each one, you can set the color and width, and choose between vertical and horizontal. [. . . ] 3840 Kilroy Airport Way MS: 6-43 Long Beach, CA 90806-2469 (562) 290-5254 Telephone: Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2. 909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]