User manual EPSON POWERLITE 821P

[. . . ] Epson PowerLite 821p Multimedia Projector ® ® User's Guide Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. [. . . ] (Not available when you're projecting from the ceiling or using rear projection. ) Select ON or OFF. Operation Lock When turned on, this function disables all projector buttons except the P Power button. Changes to this setting take effect after you restart the projector. (After you turn off the projector, wait for the Power light to turn a steady orange before turning it on again. ) Pointer Shape Lets you select from three different pointer shapes. Brightness Control Select Low lamp brightness when the projection is too bright for the room. The Low setting also reduces electricity consumption and fan noise. Select High to project the maximum brightness. (Also check the Brightness setting in the Image menu; see page 54. ) Volume Adjusts the volume for the projector's speaker. When you're finished, press Esc or Menu. 58 Fine-tuning the Projector Selecting Projector Setup Options Use the Extended menu to customize the way you set up the projector. You can configure the projector for rear and/or ceiling projection, change the language for the menus and messages, set the screen background color, capture and store a custom image or logo for the startup screen, and set up the projector for network use. You see the features and their settings on the right side: 3. Then use the pointer button (or the up and down arrow buttons) and the Enter button to set the following options: Display Message: Lets you turn screen messages on or off. Background Color: Sets the screen background to Black, Blue, or Logo when the A/V Mute button is pressed. Startup Screen: Enables or disables display of the startup note The Startup Screen option must be turned on if you want to display a user's logo. A user's logo cannot be created and the Startup Screen option cannot be turned off if the User's Logo Protect feature has been turned on. See page 65. screen when the projector is turned on. Either the Epson logo or your own logo (if you've created one, as described on page 63) appears. User's Logo Let's you record your own user's logo. See page 63 for more information. Fine-tuning the Projector 59 Projection Front: Projector is in front of the screen. Front/Ceiling: Projector is in front of the screen, mounted upside-down from the ceiling. Rear: Projector is behind the screen. Rear/Ceiling: Projector is behind the screen, mounted upside-down from the ceiling. note When Direct Power is turned on, turn the projector off as you would normally. When Direct Power is enabled, it's a good idea to unplug the projector after turning it off. Otherwise the projector will turn on automatically when power is restored after a power failure. Operation Direct Power: When this feature is enabled, projection starts as soon as you plug in the power cord. You don't have to press the P Power button. Sleep Mode: When this feature is enabled, the projector lamp automatically turns off when the projector has not received any input signals for 30 minutes. This conserves electricity, cools the projector, and extends the life of the lamp. [. . . ] When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. The exchanged product or part may be new or previously refurbished to the Epson standard of quality, and at Epson's option, the replacement may be another model of like kind and quality. Epson's liability for replacement of the covered product will not exceed the original retail selling price of the covered product. Exchange or replacement products or parts assume the remaining warranty period of the product covered by this limited warranty. [. . . ]