User manual EPSON STYLUS DX4050

[. . . ] Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. SEIKO EPSON CORPORATION shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than EPSON Approved Products by SEIKO EPSON CORPORATION. EPSON is a registered trademark and EPSON ESC/P and EPSON Stylus are trademarks of SEIKO EPSON CORPORATION. [. . . ] Then turn on the Stylus Scan by pressing the P power button. Plug the appropriate end of the cable into the USB port on the back of the Stylus Scan. (The end that fits the Stylus Scan has a different shape from the end that fits the computer. ) Note: To connect the Stylus Scan to a USB port, you need a standard shielded USB cable. Connect the other end of the cable to the computer's USB port. Note: If you have more than one USB hub connected to your computer, connect the Stylus Scan to the hub that is connected directly to your computer. If the EPSON Stylus Scan does not work properly when connected to the hub, connect it directly to the computer's USB connection. To connect your Stylus Scan via a USB hub, follow the instructions given in the online Setting Up Guide. Follow the on-screen instructions to install the printer and scanner drivers. When requested to do so, type E:\EPSON\ENGLISH (or your preferred language) in the Copy files from box and click OK. If your CD-ROM has a drive letter other than E, substitute the appropriate letter. During the driver installation, the EPSON Screen Calibration utility starts automatically. Click OK to register the calibration setting. Turn on the Stylus Scan by pressing its P power button. 10. Plug the appropriate end of the USB cable into the USB port at the back of the Stylus Scan. (The end that fits the Stylus Scan has a different shape from the end that fits the computer. ) Note: To connect the Stylus Scan to a USB port, use a standard shielded USB cable. Connect the other end of the cable to the computer's USB port. Note: If you have more than one USB hub connected to your computer, connect the Stylus Scan to the hub that is connected directly to your computer. If the EPSON Stylus Scan does not work properly when connected to the hub, connect it directly to the computer's USB port. s Selecting your EPSON Stylus Scan in the Chooser After you install the printer software in your Macintosh, you need to open the Chooser to select your Stylus Scan. You have to choose the Stylus Scan the first time you use it or whenever you want to switch to another printer. Your Macintosh always prints using the last printer selected. Setting up your Stylus Scan 2500 15 English 7. The EPSON Screen Calibration utility starts automatically. In the following window, move the slider to the right or left until the two shades of the gray horizontal stripes match. 1. Select Chooser from the Apple menu. Then click the Stylus Scan icon, and the port your Stylus Scan is connected to. 2. Click the Background Printing radio button to turn background printing on or off. [. . . ] If the Acrobat Reader is already installed on your system, you can skip the next section. Note: If the Adobe Acrobat Reader is not installed on your system, the manual will not open and an error message will be displayed. Installing the Adobe Acrobat Reader 1. Insert the EPSON manual CD-ROM in your computer's CD-ROM drive. Windows 95/98: The setup program on the CD-ROM will be started automatically and displays the start screen. [. . . ]