User manual EPSON STYLUS PHOTO 950 SETUP GUIDE

[. . . ] You cannot install software programs if you log on as a Limited account user. After you install Windows XP, the user account is set as a Computer Administrator account. Make sure that printer is off, then turn on your computer. [. . . ] This process takes about one and half minutes. While charging, the P power light flashes and the printer produces a variety of mechanical sounds. This is normal. Once paper is loaded, follow these steps to check the print head nozzles. For Windows users 1. For Windows Me, 2000, NT 4. 0, 98 and 95 users, click the Start button, point to Settings, and click Printers. For Windows XP users, click the Start button, then click Control Panel, then click Printers and Other Hardware, then click Printers and Faxes. For Windows Me, 98, and 95 users, select your printer, then click Properties on the File menu. For Windows XP and 2000 users, select your printer, then click Printing Preferences on the File menu. For Windows NT 4. 0 users, select your printer, then click Document Defaults on the File menu. Click the Nozzle Check button, and follow the on-screen instructions. When you are finished, click OK to close the Properties dialog box. Your printer is now set up and ready to use. 3. Lower the output tray, then open the printer cover and the cartridge cover. c Caution: Do not move the print head by hand, as this may damage the printer. c Caution: Do not turn the power off during the ink charging process. Do not load paper until ink charging is complete. 2. Remove the protective material under the cartridge cover before installing ink cartridges. [. . . ] Your printer is now set up and ready to use. Color Ink Jet Printer 1. Make sure that printer is off, then turn on your Macintosh and insert the printer software CD in the CD-ROM drive. Double-click the EPSON icon. Do not touch this part. Print quality is determined by the driver settings and the paper. [. . . ]