User manual EPSON STYLUS PRO 10600 CANVAS PAPER GUIDE

[. . . ] Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation. EPSON® is a registered trademark, and EPSON STYLUSTM and Exceed Your Vision are trademarks of Seiko Epson Corporation. Microsoft® and Windows® are registered trademarks of Microsoft Corporation. [. . . ] Select the set that has the smallest gaps, and then press the Paper Feed or Paper Feed button to display the number for that set. If you are not satisfied with the result of this alignment, press the Paper Source button to return to the previous level, and then select BI-D ALL. If you are not satisfied with the result of BI-D ALL alignment, try UNI-D. After you set the patterns, press the Pause to the READY status. button to return The Control Panel 182 Making the paper settings You can register and recall your own paper settings according to any media. The paper settings you can make are: Platen gap Thickness pattern Thickness number Cut method Paper feed adjustment Eject roller type Drying time Suction MicroWeave adjustment Registering the settings To register the paper settings, follow the steps below. Press the Menu button to enter Menu mode. Press the Menu button to display PAPER NUMBER. button, and then press the Paper Feed 5. Press the Menu or Paper Feed button to select STANDARD or the number (No. 10) you want to register as the setting. If you use Epson special media, select STANDARD, and then go to the step 9. Press the Paper Feed or Paper Feed button to select the number registered that you want to use. If you select STANDARD, the printer prints data according to the driver settings. X, the control panel settings override the driver settings. Press the Menu you selected appears on the LCD panel. Press the Pause button to exit Menu mode. The Control Panel 185 Printing a status sheet In Menu mode, you can print a status sheet to see the current default values. To print a status sheet, follow the steps below. Make sure that paper is loaded in the printer. Press the Menu button to enter Menu mode. 3. Press the Paper Feed or Paper Feed button to display button. Press the Paper Feed or Paper Feed STATUS CHECK, and then press the Menu 5. button to display button. button again to start printing a status After printing is finished, the printer exits Menu mode and returns to the READY status. The Control Panel 186 Setting the alert value of the paper You can get a message when there is not much left, by setting the alert value using the steps below. [. . . ] See also halftones. head alignment The operation to correct any misalignment of the print heads. Vertical banding will be corrected. head cleaning The operation to clean any clogged nozzles for correct printing. high speed printing Printing in which images are printed in both directions. This provides faster printing. initialization Returns the printer to its defaults (fixed set of conditions). This happens every time you turn on the printer or reset the printer. ink cartridge The cartridge which contains ink. ink jet A method of printing in which each letter or symbol is formed by precisely spraying ink onto paper. Glossary 333 interface The connection between the computer and the printer. [. . . ]