User manual EPSON STYLUS PRO 4000

[. . . ] EPSON Stylus Pro 4000 ® PRINTER GUIDE All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with these EPSON printers. EPSON is not responsible for any use of this information as applied to other printers. [. . . ] Always verify settings to get the results you expect. Choosing Paper and Layout Options You can select a variety of settings for margins, orientation, paper saving, sizing your image, and double-sided printing. Follow the instructions below to select settings for cut sheet paper, or the instructions on page 78 for roll paper. Choosing Cut Sheet Paper Options 1. On the Properties window, click the Paper tab. Select the paper source you're using (Paper Tray, Roll Paper, Roll Paper (Banner), or Manual Feed) from the Paper Source list. For more information about printing on roll paper, see page 78, 3-76 Printing with EPSON Drivers for Windows | 77 3. If you want to print to the edges of the page, click Borderless. Note that borderless printing applies only to the left and right sides of the page on cut sheets; margins are required at the top and bottom of the page. For full-bleed borderless printing, use roll paper, as described on page 78. Choose Auto Expand or Retain Size from the pull-down menu: · · Auto Expand enlarges your image (up to 3%) to fit the size of the paper. Retain Size prints your image at the size you specify in your application. You need to size it about 1/4 inch wider than the paper width if you want to print without borders. Select the Paper Size loaded in the printer. Make the settings you want for Copies, Orientation, and Printable Area. · · · Standard makes the bottom margin larger than the top and sides. Maximum reduces the bottom margin (available only for plain paper). Centered places the image in the center of the printable area. 6. If you want to reduce or enlarge your image or print on both sides of the paper, click the Layout tab. See your electronic Reference Guide for more information about double-sided printing. After making your settings, click OK. 3-77 78 | Printing with EPSON Drivers for Windows Note: Many application settings override settings in the printer driver. Always verify settings to get the results you expect. Choosing Roll Paper Options Follow these steps to print on roll paper and select settings for borderless printing and automatic cutting: 1. On the Properties window, click the Paper tab. Select Roll Paper or Roll Paper (Banner) from the Paper Source list. The Roll Paper (Banner) setting allows you to print a series of continuous images without any margin space between them. This option is not available with all applications. [. . . ] Turn on the printer and press the small black button on the back of the Ethernet card. Hold it down until the printer starts printing a series of status sheets. See the documentation that came with the print server for instructions on configuring it for your network. Removing the Print Server Card WARNING: The card will be hot after printing. Make sure you allow the card to cool before handling it. If you need to ship your printer to EPSON for service, you must remove the card. [. . . ]