User manual EPSON STYLUS SX430W

[. . . ] Peel off plastic 5 3 4 5 Install the Ink Cartridges Lower the output tray and open the cover. Lift up the two ink cartridge clamps. Install both ink cartridges, and leave them installed for all types of printing, or the printer won't work. Keep ink cartridges out of the reach of children and do not drink the ink. If ink gets on your skin, wash the area thoroughly with soap and water. [. . . ] If ink gets on your skin, wash the area thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. Unwrap the ink cartridges, then remove only the yellow part of the tape seal on top. Don't pull off the blue part. Peel off tape and remove blue insert Make sure you've got a USB cable to connect the printer to your computer (not included). See "System Requirements" in your Printer Basics book. 2 Put on the Paper Supports 1 Insert the paper support into the slots on the back of the printer. 2 2 1 2 3 black ink cartridge color ink cartridge Insert the roll paper adapter into the slots on the back of the printer. roll paper adapter Tilt each cartridge toward you as you lower it. Make sure the tabs rest on the hooks as shown. Don't place the cartridge tabs under the hooks; you may damage the clamp when you close it. For information on loading and using roll paper, see your Printer Basics book. 3 Connect the Printer to Your Computer Make sure the printer and computer are turned off. Connect the (square) end of the USB cable to your printer's USB port. Connect the (flatter) end of the cable to your computer's USB port. 3 5 6 Lower the clamps so they snap shut. If you want the program, click Install and follow the instructions on the screen. When you're finished installing software, click Back to return to the Main Menu. You see this menu: If you don't have an Internet browser, such as NetscapeTM or Microsoft® Internet Explorer (versions 3. 0 or later), you won't be able to view the on-screen manual. 7 Install the Printer Software Locate the CD-ROM that came with your printer and carefully follow these steps to install the printer software. 7 1 2 3 4 5 6 7 8 9 Double-click Double-click Double-click 8 2 3 4 5 6 7 8 9 Windows 98 or Me If you're using Windows 2000, see your Printer Basics book for installation instructions. Then turn on your computer and wait until you see your desktop icons. When you see The New Hardware Wizard, click Cancel. Insert the printer software CD-ROM in your drive. EPSON to start the installer. Read the license agreement and click Agree. The installer copies files and displays a series of windows. Follow the instructions on the screen. Click View Reference Guide to open the on-screen manual. To copy it to your computer, click Install Reference Guide and follow the instructions. [. . . ] Follow the instructions on the screen. Click View Reference Guide to open the on-screen manual. To copy it to your computer, click Install Reference Guide and follow the instructions. When you're finished, close your browser and click Quit. Remove the CD-ROM. 10 When setup is finished, click OK. You see the EPSON PhotoStarter Setup. 11 Click Next and follow the on-screen instructions. Do the same thing when you see the EPSON CardMonitor Setup. 9 Print a Photo Now that you've set up your printer, you're ready to print. See your Printer Basics book or Quick Reference card for instructions. EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. [. . . ]