User manual EPSON WORKFORCE PRO WF-5110DW NETWORK ADMINISTRATOR'S GUIDE

[. . . ] Q Press x r or r x for 3 seconds to copy in draft mode. Q While pressing x r or r x, press y within 3 seconds to make 20 copies. C O Do not load paper above H mark inside the edge guide. Loading Capacity (sheets) for copying Capacité de chargement (feuilles) pour la copie Fassungskapazität (Blätter) für Kopiervorgang Laadcapaciteit (vel) voor het kopiëren Plain Paper Bright White Ink Jet Paper 11 mm 80 A4 E a b Q To connect via Wi-Fi, make sure that Wi-Fi is enabled on your computer. [. . . ] If the network connection failed, refer to the online Network Guide. Guide to Control Panel / Guide du panneau de contrôle / Erklärung des Bedienfelds / Uitleg bij bedieningspaneel Reading the Indication Lights / Interprétation des voyants / Lesen der Anzeigeleuchten / Betekenis van indicatielampjes : flashing / clignotant / Blinken / knippert : on / allumé / Leuchten / brandt The paper is jammed in the sheet feeder. Remove the jammed paper from the sheet feeder, load paper correctly, and press x r or r x. No paper is loaded, or multiple sheets were fed at the same time. Load paper in the sheet feeder correctly and press x r or r x. Ink cartridge(s) are running low on ink. Prepare new ink cartridge(s) or replace the cartridge(s). Only remove the cartridge when you are ready to replace it. Ink cartridge(s) with a low ink level cannot be used even if they are reinserted into the printer. To replace ink cartridge(s) that are running low, open the scanner unit and press y for 6 seconds until the print head moves. Next, follow the steps from step C in “Replacing Ink Cartridges”. (b)  + P While pressing , turn on the printer to return the network settings to their defaults. ,  y For their special operations, see the “Copying” section. Never touch the ink cartridges while the print head is moving. B C Use only the power cord that comes with the printer. Use of another cord may cause fire or shock. Do not use the cord with any other equipment. Place the printer near a wall outlet where the power cord can be easily unplugged. Use only the type of power source indicated on the printer. Make sure the power cord meets all relevant local safety standards. Do not let the power cord become damaged or frayed. F G H Keep the printer away from direct sunlight or strong light. [. . . ] Do not let the power cord become damaged or frayed. F G H Keep the printer away from direct sunlight or strong light. Do not open the scanner unit while copying, printing, or scanning. Do not use aerosol products that contain flammable gases inside or around the printer. [. . . ]